community toilet sagar sangha math under baruipur ps. 1 community toilet 2 earth work in excavation of foundation trenches or drains, in all sorts of soil ( including mixed soil but excluding laterite or sandstone ) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.a ) depth of excavation not exceeding 1.50 m. 3 single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand 4 cement concrete with graded jhama khoa ( 30 mm size ) excluding shuttering in ground floor and foundation. ( a ) 1:3:6 proportion 5 ordinary cement concrete ( mix 1:1.5:3 ) with graded stone chips ( 20 mm nominal size ) excluding shuttering and reinforcement, if any, in ground floor as per relevant is codes.a ) pakur variety 6 hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works ( upto roof of ground floor ) 7 reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust ( if necessary ) , cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i ) tor steel / mild steel 8 125 mm. thick brick work with 1st class bricks in cementmortar ( 1:4 ) in ground floor 9 supplying, fitting & fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones ( 10mm ) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. in floori ) coloured decorative 10 supplying, fitting & fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones ( 10mm ) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. in walli ) coloured decorative 11 a ) m.s.or w.i. ornamental grill of approved design joints continuously welded with m.s, w.i. flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor 12 supplying 1.5mm thick m.s. sheet fitted and fixed on one or both faces of m.s. / w.i. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. 13 providing and fixing pvc door frame of size 50x47mm with a wall thickness of 5mm ( ± 0.2 mm ) made out of single piece extruded pvc profile, with mitred cut joint sand joint with 2 nos. of pvc bracket of size 190 mm x 100 mm long arms ofcross section size 35 mm x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20mm m.s. rectangular tube of 0.8 mm , including providing epdm rubber gasket weather seal throughout the frame, including jointing 5 mm pvc frame strip with pvc solvent cement on the back of the profile. the doorframe to be fixed to the wall using 8 x100mm long anchor fasteners complete, all as per manufacturer?s specification and direction of engineer -in- charge 14 supplying, fitting & fixing 30 mm thick factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make and manufacture, m.s. frame covered with 5 mm th. heat moulded pvc “c” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide pvc sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide pvc sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. top, bottom and lock rails shall be provided either side of the panel with 10 mm ( 5 mmx2 ) th., 20 mm wide cross pvc sheet as gap insert for top rail and bottom rail. paneling of 5 mm th. both side pvc sheet to be fitted in the m.s. frame welded / sealed to the 15 plaster ( to wall, floor, ceiling etc. ) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, caffolding / staging where necessary ( ground floor ) . [ excluding cost of chipping over concrete surface ] ii ) with 1:4 cement mortar ( a ) 15 mm thick plaster 16 applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly ( plastered or concrete surface ) as per manufacturers specification. 17 supplying, fitting and fixing pvc pipes of approved make of schedule 80 ( medium duty ) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 ( part - i ) . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. ( a ) for exposed worki ) 32 mm 18 ( b ) for concealed work i ) 20 mm 19 ( a ) ( i ) chromium plated bib cock short body ( equivalent to code no. 511 & model - tropical / sumthing special of essco or similar brand ) . 20 ( d ) ( i ) chromium plated angular stop cock with wall flange ( equivalent to code no. 5053 & model - florentine of jaquar or similar ) . 21 supplying, fitting and fixing e.w.c. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. ( a ) with p trap