supply, testing, installation , commissioning and demonstration of hand tools, instruments, equipment and machinery etc. for the course of fitter hydraulic and pneumatic system.- 1 fitter:-hydraulic & pneumatic system. 2 hydraulic trainer kit specification: - each consisting of the following matching components and accessories: i. hydraulic power pack- with ( 1 ) external gear pump having a delivery rate of 2.5 lpm, ( approx. ) @ 1400 rpm operating pressure 60 bar, coupled to a single-phase ac motor ( 230 v ac ) having start capacitor and on / off switch and overload protection, ( 2 ) pressure relief valve adjustable from 0 – 60 bar, ( 3 ) oil reservoir, ≥5 litres capacity having sight glass, drain screw, air filter, and p and t ports.- 1 no. ii. pressure relief valve- pilot-operated- 1 no. iii. drip tray, steel- size 1160 mm x 760 mm.- 1 no. iv. pressure gauge- glycerin-damped, indication range of: 0 – 100 bar- 1 no. v. four-way distributor- with five ports, equipped with a pressure gauge- 1 set. vi. double acting hydraulic cylinder- with a control cam, piston diameter16 mm, piston rod diameter10 mm, stroke length 200 mm.- 1 no. vii. suitable weight- for vertical loading of hydraulic cylinder- 1 no. viii. mounting kit for weight- for realizing pulling and pushing load.- 1 no. ix. 3 / 2-way directional control valve- with hand lever actuation.- 1 no. x. 4 / 2-way directional control valve- with hand lever actuation.- 1 no. xi. 4 / 3-way directional control valve- closed-centre position, with hand lever actuation.- 1 no. xii. non-return valve.- 1 no. xiii. pilot-operated check valve- pilot to open.- 1 no. xiv. one-way flow control valve- with integrated check valve.- 1 no. xv. t-connector with self sealing coupling nipples ( 2 nos. ) and quick coupling socket ( 1 no. ) .- 2 set. xvi. profile plate, anodised aluminium, 1100x700 mm, with carriers, mounting frames and mounting accessories ( to be fitted onto the hydraulic workstation ) .- 1 set. [ 5 ( five ) years annual maintenance contract ( amc ) beyond normal guarantee / warranty period is applicable for this item. yearly price ( price for one year ) of 5 ( five ) year annual maintenance contract ( amc ) is to be quoted in a separate column in boq. ] 3 hydraulic workstation specification: - with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: ( 1 ) work table – size ( approx. ) l1200mmxw900mmxh900mm, with four castor wheels including two lockable wheels at the front side, ( 2 ) drawer – size ( approx. ) – l460mmxw495mm xh158mm each, and overall size of drawer unit ( approx. ) - l470mmxw495mmxh825mm and ( 3 ) drawer slide height ( approx. ) 85mm. [ 5 ( five ) years annual maintenance contract ( amc ) beyond normal guarantee / warranty period is applicable for this item. yearly price ( price for one year ) of 5 ( five ) year annual maintenance contract ( amc ) is to be quoted in a separate column in boq. ] 4 cut-section models specification: - for hydraulic components. ( i ) external gear pump of size having delivery rate 2.5 ltr. / min, at 1400 r.p.m., on pressure- 60 bar., ( ii ) double acting cylinder of size having stroke length 200 mm, bore dia- 20 mm., ( iii ) 5 / 2 ( 5 port 2 position ) hand operated directional valve., ( iv ) 4 / 3 ( 4 port 3 position ) hand operated directional valve., ( v ) non-return valve of inlet dia 1 ( one ) inch and outlet dia 1 ( one ) inch., ( vi ) pressure reliefvalve of inlet dia 1 ( one ) inch and outlet dia 1 ( one ) inch., ( vii ) pilot operated check valve of inlet dia 1 ( one ) inch and outlet dia 1 ( one ) inch., ( viii ) one-way flow control valve of inlet dia 1 ( one ) inch and outlet dia 1 ( one ) inch., ( ix ) pressure gauge of size having capacity 120 psi or higher., ( x ) accumulator of size having capacity 1 ( one ) ltr. or higher.