supplying of covered tipping refuse / garbage trailer ( refuse vat ) 2 nos for haldibari municipality supplying of covered tipping refuse / garbage trailer ( refuse vat ) 2nos. for haldibari municipality , covered tipping refuse / garbage trailer: , supplying of covered tipping refuse / garbage trailer ( refuse vat ) having specifications: 1. stainless steel body- box type, size-10-0 × 6-0 × 2-0 ( +17 ) , tipping, two wheeler, capable of being drawn by tractor. 2.chassis: to be fabricated from m.s. channel 100× 50 × 6 mm with cross member of same section for upper chassis & 125 × 65 × 6 mm m.s.channel for lower chassis with cross member of same section. 3. drawbar: tri-angular a type drawbar to be fabricated form 100 × 50 × 6 mm m.s. channels fitted with spring loaded eye hook ( 40mm m.s. round ) , parking screw jack made of 2 m.s.round ( 2-8 long ) with 3 m.s. round nut fitted in m.s. channel - 100×50×6mm. 4. platform: to be fabricated from m.s.channel 75×40×6mm with cross member of same section, by means of jeep type covered with 4mm thick stainless steel plate-304 grade, electrically welded all joints. 5. side boards: four nos of side boards to be fabricated form m.s. angle 45×45×6 mm with cross member of same section covered with 12 gauge thick stainless steel plate- 304 grade. out of 4 nos. side boards three sides will be open for remobal of garbage and front side will be closed. 6. divider- one no. divided will be insert the inner portion of traileer for bio-degradale & non-degradable of size- 6-0 × 2-0 ( +17 ) each. back cover will made in such a way that only either bio degradable or non degradable item comes outside and made from m.s. angle, flat & 12 gauge stainless steel sheet. 7. hydraulic tipping arrangement- 1 no. telescopic type hydraulic ramp ( 15 m.ton ) fitted to the lower chassis of the trailer complete with hydraulic hose, coupling etc. to tip the body at an angle 40 / 50 degree. 8. covered portion- to be fabricated form m.s. angle 35×35×6 mm & 40×40×6mm covered with 14 gauge thick stainless steel sheet 304 grade.two nos. loading dala on each side. 9. wheel equipment- two nos of pneumatic tyre wheel 9.00×16 ( nylon, 18 ply ) with tube ( ceat / mrf / good year / jk ) and heavy duty churri rim fitted on high tensile strength 70mm sq. axle, heavy duty forged steel, hubs, taper roller bearing -30209 & 30211 skf. 10. suspension- 2 nos semi arc type fabricated spring or suspended spring 32-70×12mm - 13ply fitted under the chassis with u-clamps, jullon patti, u-bolts etc. 11. construction- arc welded & bolted. 12. mirror polish finishing. painting- tow coats of ici synthetic enamel paint over a coat of primer in outside one side marked as blue and other side marked as green & in inside anticorrosive black paint over red oxide primer only on iron portion and embossing the name of our office. 13. warranty- 1 year warranty