tender for repairs to old staff quarters at sub circle fatehpur sikri, agra; 1 excavation work in ordinary rock by manual means in foundation trenches or drains ( not exceeding 1.5m in width or 10 sqm on plan ) , including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. ( rate including g.s.t ) . 2 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:4:8 ( 1 cement : 4 coarse sand ( zone-iii ) : 8 graded stone aggregate 40 mm nominal size ) . ( rate including g.s.t ) . 3 coursed rubble masonry ( second sort ) with hard stone in foundation & plinth with :cement mortar 1:6 ( 1 cement : 6 coarse sand ) including labour for carriage of material from stock at road side to site of work approx distance 100 mt. & lift up to 15 mt. ( rate including g.s.t ) . 4 providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand ( zone-iii ) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources ) . ( rate including g.s.t ) . 5 coursed rubble masonry with hard stone ( first or second sort ) in facing up to 22.50 cm thick random rubble masonry in bck side in superstructure above plinth level and up to floor five level. masonry work ( second sort ) , in cement mortar 1:6 ( 1 cement: 6 coarse sand ) including labour for carriage of material from stock at road side to site of work approx distance 100 mt. & lift up to 15 mt. ( rate including g.s.t ) . 6 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:4 ( 1 cement : 4 coarse sand ) . ( rate including g.s.t ) . 7 stone work, plain in copings, cornices, string courses and plinth courses, up to 75 mm thick in cement mortar 1:6 ( 1 cement : 6 coarse sand ) , including pointing with white cement mortar 1:2 ( 1 white cement : 2 stone dust ) with an admixture of pigment matching the stone shade inlcuding labour for carriage of material from stock at road side to site of work approx distance 100 mt. & lift up to 15 mt. ( rate including g.s.t ) . 8 providing and fixing red sand stone horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 ( 1 cement : 4 coarse sand ) , including pointing in white cement mortar 1:2 ( 1 white cement : 2 stone dust ) with an admixture of pigment matching the stone shade. ( rate including g.s.t ) . 9 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone-iii ) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ) including labour for carriage of material from stock at road side to site of work approx distance 100 mt. & lift up to 15 mt. ( rate including g.s.t ) . 10 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level mild steel and medium tensile steel bars including labour for carriage of material from stock at road side to site of work approx distance 100 mt. & lift up to 15 mt. ( rate including g.s.t ) . 11 centering and shuttering including strutting, propping etc. and removal of form for weather shade, chajjas, corbels etc., including edges. including labour for carriage of material from stock at road side to site of work approx distance 100 mt. & lift upto 15 mt. ( rate including g.s.t ) . 12 providing & laying 10 cm thick ( average ) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 ( 1 clay : 1 cow dung ) and covered with flat tile bricks, grouted with cement mortar 1:3 ( 1 cement : 3 fine sand ) mixed with 2% of integral water proofing compound by weight of cement and finished neat: with common burnt clay f.p.s. ( non modular ) brick tile of class designation 10. ( rate including g.s.t ) . 13 providing 20mm cement plaster 1:2 ( 1 cement : 2 stone dust ) inlcuding labour for carriage of material from stock at road side to site of work approx distance 100 mt. & lift up to 15 mt. ( rate including g.s.t ) . 14 ruled / flush pointing on red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1 / 2 { one lime: 1.5 surkhi ( 50% red and 50% light yellow surkhi ) : 1 / 2 marble dust } . ( rate including g.s.t ) . 15 providing and fixing 1 mm thick m.s. sheet sliding shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm m.s. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and tiron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including labour for carriage of material from stock at road side to site of work approx distance 100 mt. & lift up to 15 mt. ( rate including g.s.t ) . 16 providing and laying vitrified tiles in floor with different sizes ( thickness to be specified by the manufacturer ) , with water absorption less than 0.08% and conforming to is:15622, of approved brand & manufacturer, in all colors and shade, laid with cement based high polymer modified quick set tile adhesive ( water based ) conforming to is : 15477, in average 6 mm thickness, size of tile 600x600 mm glazed vitrified tiles matt / antiskid finish etc. complete. ( rate including g.s.t ) . 17 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colors, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. ( rate including g.s.t ) . 18 providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. ( approx in one toilet block 32mm dia 15.00m, 20mm dia -35.00m ) . ( rate including g.s.t ) . 18-1- 32 mm nominal dia pipe ashirwad or eq. 19 18-2- 20 mm nominal dia pipe ashirwad or eq. 20 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :5.5 mm thick glass panes. ( rate including g.s.t ) . 21 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. ( rate including g.s.t ) . 22 finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications :two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm. ( rate including g.s.t ) . 23 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. ( rate including g.s.t ) . 24 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.electric resistance or induction butt welded tubes. ( rate including g.s.t ) . 25 providing and fixing precoated galvanized iron profile sheets ( size, shape and pitch of corrugation as approved by engineer-in-charge ) 0.50 mm ( + 0.05 % ) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by engineer in-charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55 mm ) with epdm seal, complete up to any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. ( rate including g.s.t ) . 26 demolishing stone rubble masonry in lime mortar manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. ( rate including g.s.t ) . 27 c. r. stone masonry as under pinning in super structure with 80% old available at site & 20% new purchase hard sand stone in composite lime mortar 1:1:1 ( 1lime :1surkhi :1c.sand ) mixed with composite materials including supply of materials labour, scaffolding etc. complete for proper completion of work. ( rate including g.s.t ) . 28 red sand stone flooring 50mm thick fine dressed on all exposed surface in required pattern & fine joint over 25mm thick composite lime mortar 1:1:1 ratio mortar ( 1lime, 1 surkhi, 1 c.sand, ) matching to the stone shade including pointing with 1:1:1 ratio mixed with coloring pigment matching to the original and supply of all material labour t&p etc. required for proper completion of work. ( rate including g.s.t ) . 29 taking out old r.s. joists 175x85x5.80mm from vaulted ceiling very carefully without disturbing adjoining the structure including stacking within 50 meters lead and fixing of new r.s. joist ( 175x85x5.80 ) mm in same place etc. complete. ( rate including g.s.t ) . 30 providing and fixing double scaffolding system ( cup lock type ) on the exterior side of building / structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and / or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge. ( rate including g.s.t ) . 31 providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length second class teak wood. ( rate including g.s.t ) . 32 providing and fixing second class teak wood 35 mm thick shutters paneled or paneled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, dandla, handle all complete as per direction of engineer-in-charge. ( rate including g.s.t ) . 33 providing and laying polished granite stone in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. polished granite stone slab colour of black, cherry / ruby red or equivalent. ( rate including g.s.t ) . 34 provision for purchase of sanitary materials and fittings for toilet blocks at dak bungalow. ( rate including g.s.t ) . 33-1- angle valve hindware or eq. 35 33-2- bib cock hindware or eq. 36 33-3- pillar cock for basin hindware or eq. 37 33-4- tawel rod / ring hindware or eq. 38 33-5- hanger ss 39 33-6- waste pipe 40 33-7- ss 4 dia jali 41 33-8- soap holder 42 33-9- connection pipe 43 33-10- mirror of required size 3x2 44 33-11- toilet paper roll holder 45 33-12- wash basin with pedstal ivory colour hindware or eq. 46 33-13- orissa pan 23 hindware or eq. 47 33-14- ewc popular combo 48 33-15- health fucet hindware or eq. 49 33-16- urinal hindware or eq. 50 33-17- cpvc pipe 4 for toilet block to septic tank 20 long ashirvad or eq. 51 33-18- cpvc elbo, tee, joint 4 ashirvad or eq. 52 33-19- solvent, blade, regmal etc. 53 33-20- water storage tank 4 layer in puff insulation 54 33-21- union upvc 1 55 33-22- water valve upvc 1 56 33-23- door mat 3x1.5 57 33-24- labour charges for above fittings 58 provision for purchase of electric equipments / materials and fittings for proper upkeep of toilet block & h.a.s office at dak bungalow. ( rate including g.s.t ) . 34-1- modular board pvc havells or eq. 59 34-2-led tube light 18 w havells or eq. 60 34-3-led tube light 9 w 2 long havells or eq. 61 34-4-led bulb light 9 w havells or eq. 62 34-5-switch, socket, five pin etc. 63 34-6-ceiling rose havells or eq. 64 34-7-multi stand wire copper 1.5 sq.mm ( 90 mtr ) havells or eq. 65 34-8-multi stand wire copper 1 sq.mm ( 90 mtr ) havells or eq. 66 34-9-tap 67 34-10-pvc casing, batten, tee, elbo etc. 68 34-11-exhaust fan 12 havells or eq. 69 34-12-modular board pvc havells or eq. 70 34-13-led tube light 18 w havells or eq. 71 34-14-led bulb light 20 w havells or eq. 72 34-15-switch, socket, five pin etc. 73 34-16-ceiling rose havells or eq. 74 34-17-multi stand wire copper 2.5 sq.mm ( 90 mtr ) havells or eq. 75 34-18-tap 76 34-19-switch 25 amp with 5 pin for a.c. havells or eq. 77 34-20-cable 3 core aluminium 10mm 78 34-21-electric box metal seat size 200 x 300 x 150 mm 79 34-22-mcb / cutout 25 amp havells or eq. 80 34-23-window a.c. 1.50 ton 5 star brand blue star, voltas or eq. 81 34-24-stabilizer 4kva copper binding isi microtek or eq. 82 34-25-ceiling fan 1200mm, 3 blad havells or eq. 83 34-26-regulator for fan havells or eq. 84 34-27-labour charges for above fittings 85 provision for purchase of furniture ( rate including g.s.t ) .35-1- visitor chair with arm & cusion 86 35-2-executive table ( 1.80x0.90x0.75 ) m with side cabinate 87 35-3-executive high back revolving adjustable chair with arm. 88 35-4-revolving adjustable chair with arm. 89 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:4 ( 1 cement : 4 coarse sand ) . ( rate including g.s.t ) . 90 15 mm cement plaster 1:3 ( 1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall. ( rate including g.s.t ) .