supply of locker metal locker unit 4 shutterlocker metal locker unit 4 shutter, locker metal locker unit 4 shutter with leveller @ 380wx380dx1842ht suppl y and installation of sos make lockers body-lh and rh side and back panel is made up of 0.8mm thick crc a sheet confirming to is 513:2008 which is having standard dimension 1831 x380mm. shelf hanging bracket is w elded on both the side panel by spot welding. shelf hanging bracket is made up of 0.8mm thick crca sheet conf irming to is 513:2008. front frame top and bottom part made up 0.8mm thick crca sheet confirming to is 513:2 008 and horizontal part is made up 1mm thick crca sheet confirming to is 513:2008. on a front frame horizonta lly provision is given at a common distance to hold shutter bracket. locker?s top is made up of 0.8mm thick cr ca sheet confirming is 513:2008 which is having standard dimension 375 x378mm. shelf is also made up of 0.8 mm crca sheet confirming to is 513:2008. shutter- is made up on 0.7mm thick crca sheet confirming to is 5 13:2008. all the shutter are hung on shutter pin and shutter bracket, louvers are given shutter for air flow. pvc flu sh handle and name plate is used for handling and for name plate tagging. standard pad / cam lock is used for lo cking each shutter. the bodies including shelves are given anti-rust surface treatment & are powder coated with epoxy polyester powder. it involves an oxsilan pre-treatment consisting of hot water degreasing, cold water rins e i & cold water rinse ii, iron phosphating, cold water rinse, passivation & dry off oven treatment. final finish cons ists of epoxy polyester powder coating of approved color & shade with a dry film thickness of 50 to 60 ( + - 5 ) m icrons. the material is then oven baked with a controlled temperature of 180 deg.c to 200 deg.c. lockers- the p roduct must be from a manufacturer having iso 9001, iso 14001, latest bifma 5.1 certificates for few of its prod ucts.the product shall be from bifma 5.1 & 7.1 & bifma membership, griha, green pro, india design mark, iso 45001, iso 14001 & iso 50001 certified company and issued by reputed certification bodies? recogn ized by the national accreditation board for certification bodies, ( nabcb ) / member of international accreditation forum ( iaf ) . complete as per the approved sample and as per the direction of engineer-in-charge. [ warranty p eriod: 30 months after the date of delivery ] => limited