supply of total knee replacement ( as per specification ) total knee replacement ( as per specification ) , 16058 - total knee replacement ( as per specification ) specifications : 1.the knee system should be us fda approved from firm with long term market standing and have more than 20 years of clinical success. 2.the set should consist of one patella, one femoral component, tibial tray, tibial insert and fast setting cement cmw1 smart set. 3.the firm should provide all set of implant and instrumentation along with technical assistance at the time of surgery. 4.primary component should accommodate extension rod on both tibial and femoral side if desired in complex primary cases or the firm should provide the revision system with rod if desired in cases. 5.femoral jig should have the option of posterior referencing and anterior referencing. 6.tibial jig should have options of providing 0 degree, 3 degree and 5 degree slope. 7.femoral components should be aavailable in ps and cr options which can accommodate > 150 degrees of flexion ( high flexion ) . 8.femur should have a gradually reducing radius or multi radius to provide a smooth transition from stability to rotational freedom through the patients range of motion. 9.femoral contact with the insert should be designed such that there is a smooth engagement for gradual femoral rollback and stability in flexion which reducing stress to the tibial spine. 10.femoral component should have the ability to shift more than 1.5 mm anterior or posterior. 11.cr femur should have a brake radius concept to increase the radius which controls the anterior slide. 12.femur should have at least anatomic 14 different sizes. 13.the tibial base should have a central locking design that provides the architecture for the system. page 1 of 10 run date / time: 08 / 12 / 2022 02:13:02stores / central rly tender document