supply of axle box housing for memu / dmcaxle box housing for memu / dmc, axle box housing for memu / dmc, as per drawing: emu / m-0-2-002 alt.j item 2, packing instruction: packing instruction of axle box housing ( pl nos :- 30020487, 31990009 ) each axle box housing to be properly wrapped in biodegradable transparent plastic sheet subsequently is to be packed in wooden cage having adequate strength in such a manner, material should not damage during transportation / loading / unloading. suitable eco friendly cushioning material should be used to protect machined portion from damage. bottom frame to be made of wooden planks 20mm thick & should have support of at least 3 wooden battens of size 100x100 mm of suitable length to facilitate lifting by fork lifter. wooden cage should be made out of wooden strips of 20x100mm size. gap between each strip should not be more than 100mm. 3 nos. steel strips to be provided on both sides of the wooden cage for fastening purpose. a list should be pasted on each wooden cage showing po no. , pl no., description, drawing. no. / spec, qty, firms name & address and dispatch detail etc. for identification. transit damage if any shall be at the cost of supplier. , proction procedure: wi100070, quality plan: n.a.