supply of plc assembly operator equipments - plc assembly operator, micro 810 plc trainer kit - 1 no. with the following specification • ab micro810 controller with 6 digital inputs and 4 digital outputs and 2 analog inputs.• 6 digital input switches and 4 digital outputs with led indication • 2 analog inputs 0-10v variable • 24v operated, built-in power supply, additional 5v, 750ma power supply • 4 no contacts of the relays connected at outputs of the plc and a buzzer • computer connectivity to download the program using usb port • connected component workbench programming software • system requirements: i3 processor based system with windows environment with service pack 1 or windows 8 os, working module –lift ( 3 floor ) - 1 no. with the following specification • 3 floors ( ground plus two floors ) sheet metal module • floor request switches and floor sensing switches 6 inputs to plc• cabin – geared dc motor with forward and reverse movement • proper termination to wire inputs and outputs to plc, working module – conveyor- 1 no. with the following specification • sloped conveyor with shawl sheet metal module• proximity sensor to sense the shawl • start, stop push switches and fwd / rev toggle switch and buzzer• conveyor belt with geared dc motor drive• proper termination to wire inputs and outputs to plc, 1 mhz function generator with digital readout - 1 no. with the following specification• new versatile 10 mhz function generator with sine, square triangle, ramp pulse, ttl & dc• modulation of any signal by am , fm, pwm pam and internal sweep• direct display of amplitude• single push for selection functions• variable pulse duty cycle adjustment • high signal purity and constant amplitude flatness throughout the entire range• auto ranging 40 mhz frequency counter• 50 mvrms sensitivity for stable display of external signal frequency• internal modulation generator backlit lcd for display of frequency , mode, amplitude• simultaneously square wave rise time better than 70 ns, 3 mhz function generator with digital readout - 1 no. with the following specification • new versatile 10 mhz function generator with sine, square triangle, ramp pulse, ttl & dc• modulation of any signal by am , fm, pwm pam and internal sweep• direct display of amplitude• single push for selection functions• variable pulse duty cycle adjustment • high signal purity and constant amplitude flatness throughout the entire range• auto ranging 40 mhz frequency counter• 50 mvrms sensitivity for stable display of external signal frequency• internal modulation generator backlit lcd for display of frequency , mode, amplitude• simultaneously square wave rise time better than 70 ns, regulated power supply ( variable ) dual 0 to 30v / 3a - 1 no. with the following specification • input : 230 volts ac 10% 50 hz line• regulation : 0.01% for 10% line variations• load variation : 0.01% from no load to full load• ripple noise : less than 3mvpp• operating temperature : 10°c to 50°c • meters : 7 segment 3 digit voltmeter• 7 segment 3 digit ammeter• over load and short circuit protection• led with buzzer indication., regulated power supply ( variable ) single 0 to 50v / 3a - 1 no. with the following specification • input : 230 volts ac 10% 50 hz line• regulation : 0.01% for 10% line variations• load variation : 0.01% from no load to full load• ripple noise : less than 3mvpp• operating temperature : 10°c to 50°c • meters : 7 segment 3 digit voltmeter• 7 segment 3 digit ammeter• over load and short circuit protectionled with buzzer indication.