painting of pumping machinery and equipment and other allied items installed at tawi pump house, jammu-painting of pumping machinery , equipment and allied items installed at tawi pump house as detailed below by way of removing rusted paint, grease , dust deposited at various spots by scratching surface using emery paper , blowing dust from inner and outer surface of motors, lrs, avrs and cleaning surface of sluice valves and nrvs, rising mains / m.s pipes using wire brush and emery papers etc to make surface smooth and ready for painting and then applying two coats of superior quality / reputed make enamel paint of color as per originally painted machinery and allied components. ( i ) painting surface of six no’s , 750 kw 6.6 kv motors along with motor stool and base frame and job also includes painting surface of 3 no’s stand by motors complete job. ( ii ) painting surface of six no’s .liquid rotor starter for 750 kw motors. ( iii ) painting surface of pressure filters alongwith pipe fittings meant for lubrication of six nos. vt pumps. ( iv ) painting surface of 900 mm dia sluice valve installed on rising main of all the units ( v ) painting surface of 900 mm dia. non return valves installed on the rising mains of all the six units in tph ( vi ) painting surface of all the six nos rising mains and pipes of the lubrication pump , delivery pipes of the krtu pump including valves installed at tph. ( vii ) painting surface of all the units of two nos avrs including isolators.