tn-mm-1748 fire hydrant valves supply of fire hydrant valves and its spares at sstps, suratgarh , fire hydrant valves and its spares , 63mm single headed hydrant valve made of ss as per is:5290 type-``a`` isi marked with 75mm nb flanged inlet with pvc blank cap & chain flange o.d 200mm, pcd 160mm, four 19 mm dia holes. , 63 mm made of ss spindle for hydrant valve as per is:5290 type-``a`` , 63 mm made of ss bonnet for hydrant valve as per is:5290 type-``a`` , made of ss gland bush for hydrant valve as per is:5290 type-``a`` , gland packing made of asbestose as per is:5290 type-``a`` , 63 mmgland nut made of ss for hydrant valve as per is:5290 type-``a`` , check nut spindle for hydrant valve as per is:5290 type-``a`` , rubber seat washeras per is: 937 , seat valve (stop valve)made ofssfor hydrant valve. , seat check nut made ofss for hydrant valve , m. s. hex nut for hydrant valve. , c. i. hand wheel as per is: 210 for hydrant valve , made ofss 63mm female ins. outlet suitable for hydrant valve , 63mm lower lug made ofss for hydrant valve. , 63mm upper lug made ofss for hydrant valve. , pvc 63mm blank cap with s. s. chain for hydrant valve. , rubber ring as per is: 937 for hydrant valve , camtooth made ofss for hydrant valve. , springfor hydrant valve. , water monitor made of carbon steel, i)model -m (isi marked ) ii) maximum rated pressure - 12.3kg/ cm2iii)nominal water way size -75mm iv)specification - refis: 8442 -1977 v) flow at 7 kg /cm2 pressure -2580 lpm vi) inlet flange size -100 nb as per is 6392 -1971 vii) nozzle- straight stream nozzle of bronze or aluminium .viii)monitor elevation - 90° above horizontal & 60° below horizontalix) rotation -360° continuousx)finish - hot dip galvanized steel parts with fire red shade 536 of iss -1961 painted from outside. , sub total(from 1.01 to 1.20) , total packing & forwarding charges(on 1.21) , sub total of suppy+p&f (including gst) , total freight , total insurance charges , other taxes/ charges(if any) , total supply amount (1.23 to 1.26)