tender for providing additional miscellaneous items i.e. led fittings, exhaust / fresh air / wall fan / ceiling fan, computer point etc. in various branches / offices / court rooms in punjab and haryana high court, sector 1, chandigarh.- 1 dsr1.15 rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in existing surface / recessed steel / pvc conduit including dismantling as required. 2 group c 3 dsr 1.17supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required 4 3 x 1.5 sq. mm 5 3 x 2.5 sq. mm 6 dsr item no 1.30 supplying and fixing metal box of 180mm x 100mm x 60mm deep ( nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5 / 6 & 15 / 16 amps socket outlet and 15 / 16 amps piano type switch, connection, painting etc. as required. 7 supply & erection of pvc batten casing & caping of superior quality of size 1 inch on surface with suitable arrangements the job includes all labour & petty material required to complete the job to the entire satisfaction of the e.i.c. of the work.. 8 supply & erection of 9 / 10 watt, approx. 2’ feet long, surface mounted led batten type fitting to be installed on existing surface as required at site complete with connection etc. the led batten fixture should be of philips / bajaj / lighting technology / trilux / havells / surya make only. the job includes all labour & petty material required to complete the job in entire satisfaction of engineer-in-charge as per dnit item no.5. 9 supply & erection of decorative fancy mirror light with 3 nos. led of 9 watt each & with 3 nos colour changing ( white / daylight / yellow ) on existing mirror complete in all respect. the job includes all labour & patty material required to complete the job entire satisfaction of eic. 10 s / e of fresh air fan high speed motor with copper would 10” sweep with louver and plastic body complete with speed motor, blades, epoxy powder coated of havells make ventilator dx white / orient make ventilator / crompton make brisk air / usha crisp air / bajaj supreme maxima dxi only. the cost includes the connection with adjacent light points and installed on wall with suitable arrangement by providing frame of required size made out 6mm thick water proof plywood to be installed with suitable size rag bolts, nuts after making suitable size hole in the wall ifrequired at site to the entire satisfaction of engineer-in-charge. 11 supply & erection of cabin fan 16” sweep oscillating type complete with blades & regulator. the fan should have 2 nos. of pull cord switches, one for oscillation and one for speed regulation. the fan should be of havells make swing gyro / orient make industrial heavy duty / usha make turbo hdef / bajaj make esteem only. the cost includes the connection with adjacent light points and installed on wall with suitable size rag bolts, nuts and other material required to complete the job to the entire satisfaction of engineer-in-charge. 12 supply, installation, testing and commissioning of 1400 mm sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) motor, class of insulation: b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value ( cmm / w ) minimum 6.85, air delivery minimum 215 cmm, 300 rpm ( tolerance as per is : 374-2019 ) , thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c ( max. ) , insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. the fan should be of havells efficiency neo / atomberg efficio / bajaj energos make only. 13 supply & erection of exhaust fan ( heavy duty motor with copper wound metallic body ) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation, epoxy powder coating along with metallic louver to be installed in the existing opening including cost of carriage charges, making connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of engineer-in-charge. 14 size 12” sweep 900 rpm with louver of havells make turbo force sp / orient make heavy duty / crompton make exhd 300-6-1 / bajaj make supreme dlx / usha make turbo hdef 900 only. 15 supply and erection of m.s. box for computer point of size 10”x8”x3”deep made out of 16 g.m.s. sheet erected in existing wall and covered with 3mm thick white glazed bakelite sheet with provision for 4 nos. 5 amp. socket with control switch of each socket. the job includes the cost of making interconnections with suitable copper wires painting of box with approved paint and other petty material required to complete the job as per satisfaction of engineer-in-charge at site. the switch & socket should be of isi marked anchor / havells / gold medal make only. 16 s / e of computer point with 9” x 4” wooden box / board on surface covered with 3mm thick bakelite sheet having arrangement of 3 nos. 6 amp. piano type switch & 3 nos. 6 amp 3pin piano type socket isi marked. the job includes making internal connections with 1.5mm2 with copper wire testing, commissioning .the job includes all labour and petty materialrequired to completethe job to the entire satisfaction of the e.i.c. of the work. 17 supply & erection combined 15 amp switch & 6 pin 15 amp socket outlet complete pvc gang box cover from backside & open able from front side of anchor penta make. the job includes all labour and petty materialrequired to completethe job to the entire satisfaction of the e.i.c. of the work. 18 supply & erection combined 5 amp switch &3 pin 5 amp socket outlet complete pvc gang box cover from backside & open able from front side of anchor penta make. the job includes all labour and petty materialrequired to completethe job to the entire satisfaction of the e.i.c. of the work. 19 s / e of pvc sheathed copper wire following sizes to be drawn in existing pipes. the job includes making connections all labour and petty material required to complete the job to the entire satisfaction of the e.i.c. of the work. the copper wire should be of polycab / kei / havells / finolex / r.r. kables make only. the wire should be of isi marked only. 20 23. / .076 flexible wire 2 core 21 s / e of pvc sheathed copper conductor cable following sizes to be drawn in existing pipes. the job includes making connections all labour and petty materialrequired to completethe job to the entire satisfaction of the e.i.c. of the work. the copper cable should be of polycab / kei / havells / finolex / r.r. kables make only. 22 1.5sqmm x 3 core double sheathed 23 2.5 sq mm x 3 core double sheathed 24 s / e of 2’x2’ led fitting in recess type with integral / non integral driver to be installed in the existing false ceiling with 4 nos. steel chain. the fittings should be installed at site with suitable arrangement and the cost includes of 4 nos. ms chain of suitable size and length for support of fittings. the fitting should be philips / wipro / bajaj / havells / surya / jaquar / crompton / trilux make only. the job includes the cost of cutting of existing false ceiling of suitable size for erection of fitting with suitable arrangement etc. as required at site. the job includes the cost of testing, commissioning and making connection with 3x1.5 sq. mm. copper wire from adjacent light point, other petty material and labour etc. as required to complete the same to the entire satisfaction of engineer in charge. the led fittings should be as per following design criteria as per dnit item no.17. 25 s / e of2x18 / 20 watt led box type fittings made of crca sheet. the fittings should be installed on existing surface. the tube rod & batten for hosing the tube rod should be of philips / wipro / bajaj / havells / jaquar / surya make only. the job includes carriage, erection, making connections testing and commissioning of the fittings as per dnit item no.18. 26 s / e of1x18 / 20 watt led box type fittings made of crca sheet. the fittings should be installed on existing surface. the tube rod & batten for hosing the tube rod should be of philips / wipro / bajaj / havells / jaquar / surya make only. the job includes carriage, erection, making connections testing and commissioning of the fittings as per dnit item no.19. 27 supply & erection of 18 / 20 watt, approx. 4’ feet long, surface mounted white led batten type fitting to be installed on existing surface as required at site complete with connection etc. the led batten fixture should be of philips / wipro / bajaj / lighting technology / trilux / havells / surya make only. the job includes all labour & petty material required to complete the job in entire satisfaction of engineer-in-charge as per dnit item no.20 28 supply & erection of 18 / 20 watt, approx. 4’ feet long, surface mounted yellow led batten type fitting to be installed on existing surface as required at site complete with connection etc. the led batten fixture should be of philips / wipro / bajaj / lighting technology / trilux / havells / surya make only. the job includes all labour & petty material required to complete the job in entire satisfaction of engineer-in-charge as per dnit item no.21.