supplying and installation of electrical accessories at orchid zone at nbwap- 1 analyzed rate supply only 4 core 25 sqmm aluminium armoured cable of havells or similar make. 2 analyzed rate supplying only 9 mtr. steel tubular pole. 3 ( p.w.d / page no.h-1 / item no.1 ) electrical works erection of single steel tubular pole of length as given below with / without sole plate & cap etc. in cc foundation ( proportion and dimension indicated below ) , having 600x600x150 mm thick cc ( 4:2:1 ) base block below sole plate / pole with hard jhama metal including cc ( 6:3:1 ) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and gi earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 km from store to work-site including filling up the excavated earth pit with shifted soil and ramming properly a ) upto 9 mtr. s.t. pole ( 06x0.6x1.70 ) mts. 4 ( p.w.d / page no.h-2 / item no.4 ) electrical works painting of steel tubular pole of lengths and no. of coats of paint, as given below with ready mixed paint / primer of approved make, and brand incl. preparation of surface by sand paper / emery paper, cleaning etc. for receiving fresh coat of paint ( a ) upto 9.0 mtr. long pole ( i ) 1st coat of aluminium paint over 1 coat of ro priming 5 ( p.w.d / page no. h-2 / item no.4 ) electrical works painting of steel tubular pole of lengths and no. of coats of paint, as given below with ready mixed paint / primer of approved make, and brand incl. preparation of surface by sand paper / emery paper, cleaning etc. for receiving fresh coat of paint ( a ) upto 9.0 mtr. long pole ii ) 2nd coat of aluminium paint over 1st coat 6 ( p.w.d / page no. h-1 / item no.3a ( ii ) ) electrical works extra on items 1& 2 above, for providing cc ( 6:3:1 ) base block ( around the pole ) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish ( 3 mm thick ) , at the base pole ( in lieu of cc muffing ) suitable for alkathene / polythene pipe entry as directed for street light wiring, incl. s & f 20cmx15cmx10cm gi loop box, 16swg & incl. drilled hole in pole 7 ( p.w.d / page no. g-1 / item no.2a ) electrical works earthing with 50 mm dia gi pipe 3.64 mm thickx3.04 mts. long and 1 x 4 swg gi ( hot dip ) wire ( 4 mts long ) , 13 mm dia x 80 mm long gi bolts, double nuts, double washer incl. s&f 15 mm dia protection ( 1 mts long ) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mts. below the ground level as below: by tata-medium gi pipe. 8 ( p.w.d / page no. h-5 / item no. h4 ) electrical works fixing outdoor type fluorescent / sv / mv light fitting on pole including s&f 40 mm dia x 1.68 mts. long gi pipe ( isi-medium ) bracket with 40 mmx10 mm thick, ms clamp etc. and providing wiring with 2x1 / 1.40 pvc insulated and sheathed wire ( single core ) from loop box at the base of pole to light fiting through pole & bracket ( without control switch ) including making connections & painting. 9 analyzed rate supply only 2 core 4 sqmm aluminium unarmoured cable of havells or similar make. 10 analyzed rate supplying only led street light of philips or similar make. ( 60w ) 11 analyzed rate supply only 4 pole 60a contactor of havells or similar make. 12 analyzed rate supply only 24 hr.time switch of havells or similar make.