supply of material for construction of icds of agarbar at agarbarunder mgnrega & tribal development supply of material for construction of icds of agarbar at agarbar under mgnrega and tribal development , stone chips 20 mm (down) , fine sand pag no-304 sl-6 © , course sand pag no-304 sl-6 (a) , cement pag no-308 si-1 , bricks ( 1st. class kiln burnt) pag no-304 sl-1 , steel pag no-308 sl-2 , hire & labour charges for wooden shuttering including fitting fixing & striking out after completion of work 25 mm. th. shuttering.(propped condition) , hire & labour charges for wooden shuttering including fitting fixing & striking out after completion of work 25 mm. th. shuttering. , wood work in door & windows including fitted, fixed in position complete including protective coat of painting at the contact surface of the frame excluding cost of concrete, iron butt hinges and ms clamps.( local wood) pag no-88 sl-1 , m.s. clamp for fixing d/w frames in wall with c.c.(4:2:1) (40mmx6mmx, 250 length)pag no-94 sl-19 , panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hige and other fittings.25mm. thick shutters with 12mm. thick penal.(other local wood) pag no-113 sl-84 , supplying fitting, fixing of door & window fitting a) iron butt hing (10cm x 50mmx 1.25 mm) pag no-95 sl no-20 , iron socket bolt of approved quality fitted and fixed complete.(b) 100mm long x 10mm dia bolt.pag no-96 sl-25 (b) , iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (b) 250mm long. pag no-96 sl-27 , anodised aliminium d-type handle of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 230/72) fitted and fixed complete. pag no-106 sl no-65 , iron door ring of approved quality fitted and fixed with nut and washer complete. (ii) 75mm dia.pag no-103 sl-59 , m.s. ornamental grill of approved design for windows including fitting fixing complete. above 16 kg/ 59 pag no-85 sl-33 , white washing 3 coats to inside the building. pag no-169 sl no-3 , decorative cement based paint to out side the building after preparing the surface (two coats) pag no-172 sl -16 , priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. pag no-176 sl-7 , priming one coat on steel or other metal surface synthetic oil bound primer of approved quality including smoothening surfaces by sand papering. pg no-176 sl-7 , painting withbest quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. on timber or plastered surface :with other than hi-gloss of approved quality. two coats (with any shade except. pag no-176 sl-8 , paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. on steel or other metal surface :with other than hi-gloss of approved quality. two coats (with any shade except white) pag no-176 sl no-8 , supplying, fitting & fixing upvc pipes a- type and fittings conforming to 15:13592-1992 with all necessary clamps nails. including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (spun yarn,valamoid/bitumen/m-sealetc) complete.75 mm. dia. pag no-187 sl-21 , supplying, fitting and fixing orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding p or s trap (excluding cost of concrete for fixing). pag no-seni 74 sl-4 , r.c.c. well ring made with cement concrete 1:1.5:3 with stone chips and 0.80% reinforcement (including the cost of shuttering and reinforcement) cast at site fitted and fixed in position after proper curing true to plumb in the well including jointing with cement mortar 1:2 complete as per direction.65 mm thick and 0.9 metre internal dia. pag no-219 sl no-2 , supply & fitting , fixing of pvc doors to toilet and urinal (including pvc frame ) pag no-144 sl no-145 , nail, palstic sheet, etc. , construction inspection pit : 600mmx600mmx600mm , construction of septik tank 10user , constrution of circular soak well1.mtr dia 2.5 mtr depth 560mm dia m.h , labour for tube well boaring 80 mm dia , supply pvc pipe & fitting 80mm dia , 40 mm dia pvc pipe , 32 mm dia pvc pipe , supplying pvc strainer , supplying 450mm long socket , supplying 65mm dia deep well brass , 100x40 pvc socket , supply 15mm dia ms connecting rod , supply fitting 40mm dia tube well , construction masonary platform tube well , 80mm dia g.i pipe , gst