providing and fixing chinaware, c.p items and accessories in various vacant houses at punjab engineering college, sector 12, chandigarh. ( h.no. 171, 172, 171-a, 172-a, 173-a, 174-a, 176-a, 501 to 504, 501-a to 504-a- 1 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : 2 cement mortar 1:4 ( 1 cement : 4 coarse sand ) 3 providing & fixing white vitreous china water closet squatting pan ( indian type ) along with s or p trap including dismantling of oldwc seat and s or p trap at site complete with all operationsincluding all necessary materials, labour and disposal of dismantledmaterial i / c malba, all complete as per the direction of engineer-in charge. 4 orissa pattern w.c pan of size 580x440 mm 5 providing and fixing white vitreous china pedestal type water closet ( european type ) with seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 6 w.c. pan with isi marked white solid plastic seat and lid 7 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 8 white vitreous china wash basin size 550x400 mm with a pair of 15 mm c.p. brass pillar taps 9 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer - in - charge. 10 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. 11 semi rigid pipe 12 32 mm dia 13 40 mm dia 14 providing and fixing 600x450 mm beveled edge mirror of superior glass ( of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. 15 providing and fixing g.i. pipes complete with g.i. fittings and clamps, including cutting chases and making good the walls etc. 16 20 mm dia nominal bore 17 providing and fixing gun metal gate valve with c.i. wheel of approved quality ( screwed end ) : 18 20 mm nominal bore 19 providing and fixing uplasticised pvc connection pipe with brass unions : 20 45 cm length 21 15 mm nominal bore 22 providing and fixing c.p. brass shower rose with 15 or 20 mm inlet : 23 100 mm diameter 24 providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete ( new work ) : 25 20 mm dia nominal bore 26 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 27 providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 : 28 15 mm nominal bore 29 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms. 30 15 mm nominal bore 31 providing and fixing c.p. brass stop cock ( concealed ) of standarddesign and of approved make conforming to is:8931. 32 15 mm nominal bore 33 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 34 15mm nominal bore 35 providing and fixing c.p. brass extension nipple ( size 15mm x 50mm ) of approved make and quality as per direction of engineer-in-charge. 36 providing and fixing ptmt pillar cock of approved quality and colour. 37 15 mm nominal bore, 107 mm long, weighing not less than 110 gms 38 providing and fixing 1-1 / 4 x 4 c.p.brass waste of standard pattern for w / basin. 39 providing and fixing cp brass soap dishcomplete in all respect. 40 providing and fixingof c.p. towel rail 600 mm of approved make. 41 providing and fixingof c.p. towel ring 42 p&f meter box fame made & ms angle 25 mm x 25mm & ms sheet 12 guage with locking arrengement fixed with c.c1:2:4 43 p&f of hci inspection chambers / gt cover & frame & approved make including &concrete work 44 providing and fixing pvc seat cover of make cera or equivalentcomplete in all respect. 45 providing and fixing of syphonic fitting for l / l cistern of app. 46 g.i & hci scrap @rs.30 / kgpvc scrap @rs.26 / kgbrass scrap @rs.300 / kgold wooden scrap @rs.5 / kgpig lead @rs.120 / kgold bricks @rs.4 each