supply of materials for construction of icds centre convergence with bcw at singhania tg i mina bazar under birpara ii gp- 1 supply of cement approved quality at site 2 supply of 1st class bricks of all charges at site 3 supply of coarse sand including royalti and stacked at site 4 supply of tor steel of approved quality at site 5 supply of silver sand including royalti and stacked at site 6 supply of coarse aggregates including royalty and stacked. lead 25 km. a) 37.5 mm shingles 7 supply of bazree including royalty and stacked. lead 25 km. a)22.4 mm down 8 supply of sal timber of approved quality at site 9 supply of gamar wood of approved quality at site 10 supply of ms grill at site 11 supply of steel window at site including all necessary fittings complete (1.8m x 1.2m), (0.9 x 1.2)m 12 supply of polythene sheet at site 13 applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturers specification... in ground floor (iii) two coats exteral surface 14 supply of lime, coloring material, gum at site (payment to be madae as per voucher) 15 supply of primer of approved quality at site ( payment to be made as per voucher ) 16 supply of readymix paint of approved quality for timber and metalled surface at site ( payment to be made as per voucher) 17 hire charges for mixture machine & vibrator ( payment to be made as per voucher) 18 supplying, fitting and fixing m.s. clamps for door andwindow frame made of flat bent bar, end bifurcated withnecessary screws etc. by cement concrete(1:2:4) as perdirection. (cost of concrete will be paid separately) (b) 40mm x 6mm 200mm length 19 supply of iron butt hinges of approved quality fitted and fixed with steel screws, with isi mark….(viii) 100mm x 58mm x 1.9 mm 20 supply of iron hasp bolt of approved quality fitted and fixed complete with 16mm dia rod...(e) 200mm long 21 supply of anodised aluminium tower bolts of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 2681/66) fitted and fixed complete….(iii) 150mm x 10mm dia. bolt 22 supply of 16 gauge annealed wire at site 23 anodised aliminium d-type handle of approved qualitymanufactured from extruded section conforming to i.s.specification (i.s. 230/72) fitted and fixed complete...(a) with continuous plate base (hexagonal/ round rod)...(vi) 100mm grip x 10mm dia rod 24 supplying, fitting & fixing factory made prelaminatedp.v.c. door frame of size 50 mmx47 mm with a wallthickness of 5 mm, made out of extruded 5 mm prelaminated pvc sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm m.s. square tube.the two vertical door profiles are to be reinforced with 19mmx 19 mm m.s. square tube of 19 gauge, weather seal to be provided through out the frame. the door frame shall be fixed with the wall using 65/100 mm m.s. screws through the frame by using p.v.c fasteners. a minimum of 4 nos ofscrews to be provided for each vertical member and minimum 2 nos for horizontal member etc. complete as per manufacturer’s specification and direction of engineer-in-charge. 25 pvc door shutter-30 mm thick.supplying fitting and fixing p.v.c. door shutter of approvedquality & shade in position, the style & rail of the p.v.c.door shutter will be made of rigid p.v.c. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm)wall thickness.horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or m.s. galvanised tubular l shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. the sectionframe will then be fitted in by pvc panels of size 100 mmx25mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. the rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxesand all other incidental charges complete 26 supply of shutteringfor hire charges at site 27 supplying, fitting & fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc..(a) floor with sand cement mortar (1:4) 20 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91 kg/sq.m & joint filling using white cement slurry @0.20kg/sq.m.....(a) area of each tile upto 0.09 sq.m.....(ii) other than coloured decorative including white 2 x 2.5 x 0.25 = 1.25 sqm 28 precast pierced concrete jally work as per design andmanufacturers specification including moulding etc. with stonechips and necessary reinforcement shuttering complete including fitting, fixing in position in all floors...(b) 37.5mm thick panel 29 supplying and laying chequered tiles of any shade & ofapproved quality with (1:1½:3) cement concrete laid inpanels or patterns as directed in pavement, footpath etc.including necessary underlay 25 mm thick [avg] cementmortar (1:3) complete in all respect with all labour andmaterials. [using cement slurry @ 4.4 kg/sq.m at back side and @2.4 kg/sq.m for joint filling]red variety(i) 25 mm. thick ramp 1 x 2.05 x 3.5 = 7.18, hand wash 1 x 2.05 x 1 = 2.05 30 galvanised iron pipe outlet for water with bevelled end at outlet, supplied fitted and fixed complete including painting two coats to the exposedportion....(c) 40mm dia 31 hire and labour charges for 75 mm dia bamboo railing on jhau/eucalyptus or other approved timber posts 1.4 m above g.l. and 0.60 m below g. including tying strongly with coir ropes and boring holes for posts inany soil/ concrete surface/bituminious surface packingthe sides etc including cost of carriage of all materialsand labour complete including cost of restoration tothe damages of the ground to its original condition asper direction of engineer in charge after removing thebarricade. (cost of restoration would be paidseparately.)(a) 75mm. dia bamboo railing & 125mm. diajhau/eucalyptus/other approved timber posts @ 1.60mapart(i) railing with 4 rows. 32 supply of upvc pipes (b type) & fitting conforming to is -13592-1992 (a) (i) single socketed 3m length (b) 110mm (2 x 3.3 = 6.6m) 33 cost of chield friendly design & drawing (bala model) 34 add for sanitation & plumbing works ( as per pwd schedule) 35 cost of hand tube well ( as per pwd schedule) 36 display board and photography