construction of bus stand shelter ( 2 units ) , items : , supply and fixing of bus stand in panchyat area height from the ground should be 12 feet length of the bus stand should be 20 feet and width should be 8 feet . the structure work of the shed shall be done in g . i . pipe 3 nos pillers at the back side of structure shall be made in 80 nb pipe display board of m . s . material shall used between one piller to another to cover the back gap of the bus stand it should bw attach from 3 feet above from the ground and height of the board should be 4 feet and wirth till one piller to another . 3 nos truss of truss shall be attach at the top of pipes of length 8 feet and should be made upto to rectangle pipe to cover the top area . 4 nos of rectangle pipe shall be attach at the of 20 feet length to cover the top area of shed . 3 nos of stainless stell banch shell be fixed inside the shed of weight 50 kg ber banch . 2 nos of stainless steel hanging latter bin should be fixed of weight 15 per dustbin . all the welding shall be done properly for the long durablity of the shed . height tensile steel galvanized nuts , bolts should be used required in shed . heigh tensile steel galvanized nuts , bolts should be used requir in shed . the top area of the shed should be cover with fiber material made up of fiber glass reinforcement plastic of thickness not less then 4 mm of multi clour as per direction of engineer in charge . the fiber sheet should be made up of 21x9 feet and shall be attach properly at the top with proper j hook , wiser , nuts and bolts the hole structure area of the shed shall be powder coated and is done by pour polyester powder of ackzonoble or berger with 60-70 micron thickness foundation of the shed should be 2 feet 2 feet 4 feet deep inside the ground from the ground level and foundation pipe should be of 80 nb ms pipe grouth with cc 1:1 . 5:3 including curring and compation as per direction given by engineer in charge and as per photo given below