fabricated nature of items-2 moified muff neoprene rubber, for 10” pinch valve, hole dia. 25 mm, nos. of hole - 12, pcd - 365 mm, od - 410 3 perforated m.s sheet holes in sheet with standard pattern 8 x 3 x 3 mm thick 10 mm ø hole 4 aluminium angle 40 x 40 x 6 mm thick x 520 mm long having three nos. hole (jole size 12.5 mm), counter sunk bolt m 12x35 and nut, three washer (material ss 316 of bolt, nut & washer) note: 1. one hole should be at centre of angle, others two hole should be at 200 mm from center. 2. one set of counter sunk bolt, nut and three washer of moc ss316 with each hole in angle, i.e. three set of counter sunk bolt, nut and three washer with each angle. 5 strip rubber / cloth cushioning strip 16 length x 10 mm slot as per enclosed drawing no. 1 dt. 05-06-2019 6 strip rubber / cloth cushioning strip 20 length x 10 mm slot as per enclosed drawing no. 2 dt. 05-06-2019 7 strip rubber / cloth cushioning strip 20 length x 12 mm slot as per enclosed drawing no. 3 dt. 05-06-2019 8 thrust bolt for roller press head valve, as per enclosed drawing no. ibp/ mech. / vd / 194 / r.p / 2015 9 bulk thickner over flow rubber lined sump (as per enclosed drawing no. ibp / mpp / mech. / m. k. / 157 / 2012 - a) 10 bolt toggle adjusting (stud m30x1300x3.5 mm std. pitch, one end length of thread 30 mm, other end length of thread 750 mm with nut size 60 x 70 x 25 mm) part no. 4 - 254 - a - 15 11 spring for jaw crusher part no. 4 - 254 - a - 9 12 drive wheel assembly for stacker (complete with shaft, 02 type bush, lock plate & ht hex bolts fitted) (as per drawing: sheet c, c - 1 & c - 2 dated 19-09-2019 encl.) (moc certificate required for wheel & shaft, minimum guarantee of one year of operation after erection required) 13 eye bolt (rod tie) (with 04 nos h t hex nut) model: dtj 1500x1200 mm, sr. no.: 32025 / 00, cap. rating : 287 tph (approx) / 190 kw as per drawing enclosed: jmk/ibp-lgo/04/95