furnishing laboratory space with custom made laboratory tables / benches ctr and cif, river , custome made laboratory tables / benches , wall table module: ( 3730 x 750 x 900 mm ht. ) specification: ( 2 table with 2 number of pp sink with tab each and 1 table without pp sink ) material of construction under bench modules: under bench modules to be made of 1 mm thick pre-coated galvanized iron sheet ( tata / jsw steel – gi sheet ) and completely finished with epoxy powder coating. these modules to be provided with bottom cupboard with lockable doors and aluminum anodized flush handle. the under-bench modules arranged as per the diagram. the base of the modules to be provided skirting panels with adjustable feet ( tolerance from 5-20 mm to correct unevenness of flooring ) . colour options: colour combination of ivory and drawer fronts contrasting blue by powder coating technique. table top: to be made of finely polished epoxy resin coated 18 mm ± 2 mm thick black colour granite with rounded edges. pp sink with tap ( 560 x 355 x 245 mm ) : pp sink with outlet nipple and three way tap as per the diagram. technical specification: material of construction: polypropylene; chemical resistance • gasket / o ring nitrile rubber to avoid leakage; • outlet connection: 1 1 / 2b.s.p ; color: black , island table module with two tier reagent rack and electricl power point: ( 3730 x 1200 x 900 mm ht. ) specification: material of construction under bench modules: under bench modules to be made of 1 mm thick pre-coated galvanized iron sheet ( tata / jsw steel – gi sheet ) and completely finished with epoxy powder coating. these modules to be provided with bottom cupboard with lockable doors and aluminum anodized flush handle. the under-bench modules to be arranged as per the diagram. the base of the modules to be provided skirting panels with adjustable feet ( tolerance from 5-20 mm to correct unevenness of flooring ) . colour options: colour combination of ivory and drawer fronts contrasting blue by powder coating technique. table top: to be made of finely polished epoxy resin coated 18 mm ± 2 mm thick black colour granite with rounded edges. , doors for already exisiting cupboards: ( 4 sets of cupboard per laboratory ) specification: material of construction ( size: 1375 x 825mm / 1375 x 412mm / 1375 x 438mm / 1375 x 438mm ) doors: doors to be made of 1 mm thick pre-coated galvanized iron sheet ( tata / jsw steel – gi sheet ) and completely finished with epoxy powder coating. these modules to be provided with bottom cupboard with lockable doors and aluminium anodized flush handle. colour options: colour combination of fronts contrasting blue / yellow / green / red / orange for aesthetic appeal by powder coating technique. , benches with desk: ( 20 number ) specification: ( 30x30 crca square tube and wooden top and back rest ) top: to be made of 16 mm thick plywood with half-nosed or quadrant post forming lengthwise and post forming to be done on both sides. 2 mm thick edge tape binding on the shorter side. frame structure: to be made of 30 x 30 x 1.2 mm thick crca square tube and all frame ends to be welded closing the edges of the square tube. all joints to be mig welded. the welds to be coated with a pre-prep primer to increase the quality of the subsequent chemical-resistant powder coating. the bottom of the leg frame of the desk and bench to have adjustable feet levelers with tolerance from 5-20 mm to correct unevenness of flooring. dimesnison: centre table frame type : 1500 x 1200 x 750mm ht a s per the diagram. , laminar air flow cabinent: specifications: floor standing model. • working size: 3’x2’x2’; overall size: 1000x800x1950 mm • retention particle size: 0.3 microns • noise level : 65 decibel on ‘a’ scale + / - 5 • velocity: 90 feet minute + / - 20 • front door: 4 mm thick polycarbonate, foldable type. • lamp: uv illumination; fluorescent tube fittings • pressure: inclined manometer 0-50 mm range. • other accessories: 6 / 16 amp power point, castor wheels & power chord • power supply: 230 v, single phase 50hz hepa filter • media: ultra clean glass fibre paper • type: mini-pleat hepa filter, separator less • oveall size: 900x600 mm • retention: 0.3 micron with a max 25 mm wg • efficiency: 99.98% / grade h13 rating. blower assembly • outer rotor type blower system, balanced aluminium centrifugal impeller driven single phase motor, enclosed in a pu coated gi casting directly connected to the filter chamber.