repair to misc items under ge centraldelhi cantt10-1 almirah medium steel ( fd-1032 ) 2 dismantling of unserviceable cp handles and s&f new cp handles of approved quality as specified and shown on drawing. 3 dismantling unserviceable locks of almirah and s&f new locks of approved brand isi marked as specified and shown on drawing. 4 m &l for repair, denting and painting internally and externally including prepration of old painted surfaces with two coats of synthetic enamel paint complete all as specified and directed . 5 locker bed side steel ( fd-222 / 257 / 1029 ) 6 all as per srl item no 1.03 here in before but to locker bed side steel. 7 repair to charpoy gi pipe ( fd-220 ) 8 removing of old existing unserviceable newar from charpoy, tightening of all loose components of charpoy and re-weaving of charpoy with new 50-55 mm wide 1st quality white / coloured newar ( sample as approved by ge ) weaved not less than 1.6 kg per charpoy, closely inter-knitted from both sides and all joints must be stitched with nylon thread complete all as specified and directed. 9 m&l dismantling of existing unserviceable broken long rail and s&f new long rail of gi pipe medium grade 32mm bore duly isi marked including threading at both ends complete all as specified and directed. make : jindal / tata / bst. 10 m &l for dismantling of existing short rail and cutting of old long rail obtain from srl no 3.02 to the required size for short rail including re-threading at both end complete all as specified and directed. 11 m&l dismantling of existing unserviceable broken leg and cutting of old short rail obtain from srl no 12 ( c ) to be required size of leg including re-threading at one end and fixing complete all as specified and directed. 12 m&l dismantling of existing unserviceable elbow gi three way and s&f new elbow gi three way suitable for gi pipe medium grade 32mm bore pipe complete all as specified and directed. 13 s&f in replacement check nut 6mm thick suitable for 32mm bore to gi pipe charpoy of approved make complete all as specified and directed. 14 m & l 12mm thick plywood commercial type bwr grade size 1980mmx900mmx12mm thick ( in one piece only ) as top of gi charpoy with mild steel screw bolt ( machine made ) of size 75mm long, 6mm thick with hexagonal or square head at one end and screw the other with washer and hexagonal square with two central stiffener of 30x5mm flat iron, including removal of old unserviceable nylon newar, complete all as per specified and directed by engr-in-charge. make of plywood duro / archidply / jayna ( deconply ) / national confirming to is 303:1989. 15 repair to charpoy gi pipe with plytop ( fd-220 ) 16 m & l 12mm thick plywood commercial type bwr grade size 1950mmx900mmx12mm thick ( in one piece only ) as top of gi charpoy with mild steel screw bolt ( machine made ) of size 75mm long, 6mm thick with hexagonal or square head at one end and screw the other with washer and hexagonal square, including removal of old unserviceable plytop, complete all as per specified and directed by engr-in-charge. make of plywood duro / archidply / greenply confirming to is 303:1989. 17 chair verandah ( fd-259 ) 18 removing of existing unserviceable old cane and recaning of chair verandah with new plastic cane of 4.00 mm wide cane including welding of broken / damaged chair verandah including painting two coats of synthetic enamel paint incuding prepration of old painted surfaces complete all as per specified and directed by engr-in-charge. 19 removing of old unserviceable existing shoes and s&f new approved appropriate hard rubber shoes at the bottom of legs complete all as shown on drawing and as directed. 20 chair easy ( fd-229 & fd-17 ( m ) 21 removing of existing unserviceable old cane and recaning of chair easy with new plastic cane, white 2.00 mm wide ( for seat and back ) half round of 0.4 mm thick and border caning 3.5, 3.00 mm wide plastic cane of brand shah / premier including m&l for french polishing and normal repair of existing chair dining like grinding of outer surface, hamering of nail, fill of micro crack with favicol and wooden putty etc. complete all as directed by the engr-in-charge. 22 chair dinning ( fd-279 ) 23 all as per srl item no 6.01 here in before but to chair dining 24 chair writing ( fd-280 / 250 ) 25 all as per srl item no 6.01 here in before but to chair writing 26 sofa set fd-281 / 254 / map ( set of five ) 27 s&f of sofa cushion with tapestry cloth of best quality complete all as directed , cushion of size 21x22x4 of 32mm desnsity for sofa set 03 pieces to seat five. note : colour and sample of tapestry cloth will be approved by engr-in-charge. make-kurlon / sleepwell 28 french polishing to be done including preparation of old surfaces all as specified and filling of cracks with putty. wood based surface direct to vision with glossy shining when placed in position.color of polish will be as per user requirement or as approved by engr-in-charge 29 table size 900x600x760 mm with / without drawer 30 removing of unserviceable top and s&f top 18mm thick int gde prelaminated particle board ( make-kitply / bhutan board ) with 4 mm thick teakwood beading allround the edges of top before fixing the top. shape and size all as specified on drg and as directed by engineer-in-charge. 31 repair including welding of all joints of frame of table 900x600x760mm, denting and repainting with two coats of synthetic enamel paint including prepration of old painted surface complete all as per specified and directed by engr-in-charge. 32 french polishing to be done including preparation of old surfaces all as specified and filling of cracks with putty. wood based surface direct to vision with glossy shining when placed in position.color of polish will be as per user requirement or as approved by engr-in-charge 33 teapoy verandah ( fd-35 / 208 / 383 ) / map 34 removing of unserviceable top and s&f top to be 18mm thick int gde prelaminated particle board with 4mm thick seasoned teakwood beading all around the top of size as specified and shown on drg and as directed by engineer-in-charge. 35 repair including welding of all joints of frame of teapoy verandah, denting and repainting with two coats of synthetic enamel paint make asian / berger after cleaning surface for smooth painting. 36 removing of old unserviceable existing shoes and s&f new approved appropriate hard rubber shoes at the bottom of legs complete all as shown on drawing and as directed. 37 chair tubular steel with arm ( fd-75m ) 38 m & l for fixing of cushion 75mm 32 density with superior quality fabric / rexine ( not less than 200 / mtr ) on base of 12mm commercial bwr plywood with screw and high quality upholstery workmanship in replacement of existing u / s seat of chair tubular steel with arms. 39 all as per serial no 12.01above but back. 40 s&f of 2 nos flat iron stiffener of size 20 x 3mm to support seat of chair tubular steel with arm to be welded as per drawing and all as specified by the engr-in-charge. 41 bed hard with plywood top ( fd-246 / 247 ) 42 s&f in replacement top of bed hard made of 12mm thick commercial plywood bwr grade conforming to is 303-1989 of isi marked and to be fixed with 25mm long steel screw without having any joints, shape and size, all as specified on drg or as directed by engineer-in-charge. make :- greenply / duroply / archidply 43 s&f in replacement long rail and shall be of 2nd class hardwood well seasoned “sal” free from crack and dead knots, shape & size, all as per existing / specified in the drg or as directed by engineer-in-charge 44 s&f in replacement short rail and shall be of 2nd class hardwood well seasoned “sal” free from crack and dead knots, shape & size, all as per existing / specified in the drg or as directed by engineer-in-charge 45 head rest : outer ply to be replaced by 3mm thick plywood one side teak face and inner side commercial plywood bwr grade isi marked is 303-1989 including teak wood beading all round and ½ cut 12mm dia beading made to shape as shown on drg or directed by engineer-in-charge 46 foot rest :- all as per srl item no 13.04 above but to foot rest. 47 m & l for french polishing to be done including preparation of old surfaces all as specified and filling of cracks with putty. wood based surface direct to vision with glossy shining when placed in position.color of polish will be as per user requirement or as approved by engr-in-charge 48 table dining for 8 persons ( fd-273 ) 49 removing of unserviceable top and s&f top to be 18mm thick int gde prelaminated particle board ( make : kitply / bhutan board ) with 4mm thick seasoned teakwood beading all around the top of size as specified and shown on drg. 50 s&f in replacement long rail shall be 2nd class hardwood well seasoned “sal” free from crack and dead knots, shape & size, all as per existing / specified in the drg or as directed by engineer-in-charge 51 short side rail : all as per srl item no 14.02 above but shape and size as shown in drg. 52 all as per srl item no 13.06 here in before but to table dining for 8 persons 53 teapoy wooden ( fd-228 ) 54 top: all as per srl item no 14.01 here in before but to teapoy wooden 55 long rail: all as per srl item no 14.02 here in before but to teapoy wooden 56 short side rail : all as per srl item no 14.03 above but shape and size as shown in drg. 57 all as per srl item no 13.06 here in before but to teapoy wooden 58 table peg ( fd-236 / 384 ) 59 top: all as per srl item no 14.01 here in before but to table peg 60 long rail:all as per srl item no 14.02 here in before but to table peg 61 short side rail : all as per srl item no 14.03 above but shape and size as shown in drg. 62 all as per srl item no 13.06 above but to table peg 63 table bed side ( fd series ) 64 s&f, in repair, unserviceable complete set of table bed side including sides, shelf and back of 18 mm thick int grade prelaminated particle board duly polished with 4 mm thick teakwood beading on edges exposed to view complete all as specified, shown on drg and as directed. 65 s&f, in repair, unserviceable drawers of table bed side ( sides of18 mm thick int grade prelaminated particle board, base and back made of 12mm thick plywood commercial ) including telescopic channel complete all as specified, shown on drg and as directed. 66 repair, denting and repainting of square pipe frame, with two coats of synthetic enamel paint over a coat of red oxide primer make asian / berger after cleaning surface for smooth painting. 67 almirah large steel ( fd-1031 / map ) 68 all as per srl item no 1.01 here in before but almirah large steel 69 all as per srl item no 1.02 here in before but almirah large steel 70 all as per srl item no 1.03 here in before but almirah large steel 71 bed hard steel with plywood top ( map drg ) 72 s&f in replacement top of bed hard to be made of 12mm thick commercial plywood bwr grade conforming to is 303-1989 of isi marked and to be fixed with as per existing drg without having any joints, shape and size, all as specified on drg or as directed by engineer-in-charge. make :- duro / national / kitply / archidply / jayna ( deconply ) 73 repair, denting and repainting of frame of bed hard steel of conduit pipe with one coats of synthetic enamel paint with spray machine painting make asian / berger after cleaning surface for smooth painting. 74 removing of old unserviceable existing shoes and s&f new approved appropriate hard rubber shoes at the bottom of legs complete all as shown on drawing and as directed. 75 chair writing steel ( map drg ) 76 removing old unserviceable upholstery material of seat & back of chair writing like frc sheet, hussein cloth and tapestry cloth, plywood and s&f the same with pvc lipping all round in new as per specification shown in drawing or as directed by engr-in-charge. 77 repair, denting and repainting of frame of chair writing steel of cantilever type conduit pipe with two coats of synthetic enamel paint with spray machine painting make asian / berger after cleaning surface for smooth painting. 78 removing of old unserviceable existing arms and s&f new approved arms rest of black integral skin polyurethaneand reinforced with ms insert with nut complete all as shown on drawing and as directed.