periodical services to certain bldgs at darjipura at af stn baroda , m&l for preparation of the existing surfaces as directed by the engineer-in-charge and apply one coat of cement base paint , colour as approved by ge complete all as specified and directed by engineer-in-charge . , m & l for one coat of exterior emulsion paint on old decorated surface including preparation of surface by rubbing down with water cleaning the surface up to the entire satisfaction of the engineer-in-charge . , all as per item no 2 above but two coats of exterior emulsion paint on old decorated surface including preparation of surface by rubbing down with water cleaning the surface up to the entire satisfaction of the engineer-in-charge . , notes for item no 2 & 3 :- ( a ) the application shall be done as directed by engr-in-charge and as per ca provision . ( b ) second coat shall be done after 6hrs . ( c ) approx covering area of paint shall be as per manufacture instruction . ( d ) before and after application curing shall be done as per direction of engineer-in-charge . , m&l for preparation of old decorated wall surfaces by rubbing down and applying one coat of oil bound distemper over application of clear coat ( colour as approved by ge ) complete all as specified and directed . , m&l for preparation of old decorated surfaces of wall by rubbing down and applying two coats of oil bound distemper over application of clear coat ( colour as approved by ge ) complete all as specified and directed . , complete removal of existing treatement by washing , rubbing down and stopping of distempered surfaces and applying two coats of oil bound distemper over a coat of 2mm thick white putty on wall/ceiling surface complete all as specified and directed . , m&l for preparation of old decorated plastered or unplastered surfaces of walls including cornices pilasters by brooming down or steel wire brushing , scraping down , smoke shoot , moulds , mors and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on walls upto 3rd floor complete all as specified and directed . , all as per item no 7 . 00 above but one coat of white wash on ceiling surfaces complete all as specified and directed by engineer-in-charge . , preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by engineer-in-charge . , preparation of old painted surfaces of steel and iron surfaces over 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by engineer-in-charge . , cutting down vegetation growths like plants/ trees of girth n . exc 15cm from roof tops/ sides , external walls of bldgs , chajjas , wall junctions at junctions of rain water/ ci waste water pipe junctions including removal of roots and taking out carefully possible quantity of concrete in roofs embedded in walls/ slab surfaces including repairing the gi/ ci/ pvc pipe joints of that affected locations and applying tufalo chemical ( herbal rnedicine ) to arrest further growth and making good the disturbed surfaces with pcc ( 1:2:4 ) type b-1 or cm 1:2 or brick work in cm 1:4 and plastering with cm 1:4 and treating the surfaces to match with the adjoining surfaces all as specified and directed by the engineer-in-charge . , note for above item 11 . 00 :- ( i ) the unit rate quoted shall be deemed to include the cost of scafolding/staging etc . ( ii ) any ci/ac/pvc special damaged during work shall be replaced by new one to ensure leak/seapage free joint . unit rate quoted shall deemed to be include cost of replacement of specials . , m&l for writing letter or figures ( block , roman , italic or indian ) n . exc . 30 cm high on building with synthetic enamel paint all as directed . , m&l for filling surface cracks not exc 5 mm to 7 mm wide with dr fixit cracks x power or equivalent polymer modified cracks filler all as per manufacturer instructions and as directed , preparation of old painted surfaces of wall over 10cm width or grith and applying one coat of synthetic enamel paint for writing letters complete all as specified and directed by engineer-in-charge .