purchase of equipment for general electrical workshop in the university:- 1.01 digital earth resistance clamp tester: rugged clamp meter that enables non-intrusive leakage current measurement for earth ground loop testing, features a wide ground loop resistance range from 0.025? to 1500 ?, measures ground leakage current, from 0.2 ma to 1000 ma, measures ac current from 0.2 a to 30 a safety iec / en 61010-2-032: cat iv 600 v / cat ii 1000v, preferable make megger, fluke, tektronix, keysight. 1.02 digital insulation resistance tester: multiple insulation test voltages: 50v, 100 v, 250v, 500v and 1000v, automatically calculates polarization index and dielectric absorption ratio, measurement range: 0.01 m? to 10 g?, auto discharge; discharge time<0.5 second for c=1 μf or less, ip rating : ip 40 preferable make megger, fluke, tektronix, keysight 1.03 true rms digital multimeter with data logging and trend capture; 50, 000 count, 0.035% basis dc accuracy, 100 khz ac bandwidth, measure: ac and dc voltage up to 1000v, ac and dc current 500μa to 10 a, temperature, resistance, capacitance, frequency, duty cycle / pulse width, min-max avg. logging memory up to 10, 000 readings, pc software and cable, soft case for meter. preferable make megger, fluke, tektronix, keysight 1.04 true ims digital; multimeter 6000 counts: automatic ac / dc voltage selection, on contact voltage detection, 0.5% basic dc accuracy, 1 khz ac bandwidth, measures: ac and dc voltage voltage 600 mv to 6000v, ac and dc current up to 10 a, resistance, capacitance, diode, continuity, battery life 400 hours, preferable make megger, fluke, tektronix, keysight 1.05 6.5 digit digital bench top multimeter: display: 1, 200, 000 counts, 4.3 tft graphic lcd, sampling rate up to 10 k sps, dcv basic accuracy: 0, 0035%, 12 measurement functions: dcvm acv, dci, aci, 2-wire and 4-wire resistance, frequency, period, diode, graphical capabilities including histogram, bar meter and trend, temperature, measurement support rtd, thermistor as well as thermocouple, stand interfaces: usb host / device, rs-232c, lan, digital i / o preferable make megger, fluke, tektronix, keysight 1.06 ac-dc current clamp meter: 200 a ac and dc current and 600 v ac and dc voltage measurement range, 3000? resistance range, continuity detection, data hold function, cat iii 600 v safety rating preferable make megger, fluke, tektronix, keysight 1.07 digital multimeter 4000 counts, measures ac and dc voltage 400μa to 10a, resistance, capacitance, diode, continuity, 600 v cat iii safety rating. preferable make megger, fluke, tektronix, keysight 1.08 handheld lcr meter: test frequency- 100 hz / 120 hz / 1k / 10k / 100khz selectable, 20, 000 / 2, 000 counts dual display, 0.2% basic accuracy, measurement parameter: l, c, r, d, dq, esr, ?, dcr, parallel / series testing mode, 2 wire or 5 wire, measurement available, data hold and zero mode supported, interface-usb, power source-aa battery preferable make megger, fluke, tektronix, keysight 1.09 contact and non-contact tachometer: measures rotational and surface speed, user selectable unites for contact, measurement: rpm, m / min, ft / min, yd / min 1.1 annual maintenance charges 1.11 custom insurance and frieght charges for j.c.bose university of science and technology, ymca, faridabad.