repair to compound wall, fencing, gate and connected items under age b / r ( west ) at ge dehu road- 1 dismantling barbed wire any description complete all as specified and as directed by engineer-in-charge 2 dismantling fencing wire mesh , any tpe complete all as specified and directed. 3 dismantling post, struts , ( wood , steel or rcc ) any section incl. taking out embeded portion in concrete and making disturbed portiongood complete all as specified and as directed by engineer-in-charge. 4 excavating in post holes ( or similar holes ) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard dense soil complete all as specified and as directed by engineer-in-charge 5 m&l for pcc ( 1:3:6 ) type c-2 ( using 40mm graded stone aggregate ) as in foundation concrete for fencing post complete all as specified and as directed by engineer-in-charge. 6 s&f angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc ) including all necessary drilling, bolting or riveting etc and similar work conforming to fe-410-0 or fe 310-0 any size complete all as specified and as directed by engineer-in-charge. 7 s&f ms screw bolts ( machine made ) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10cm long 11 to 15mm dia of shank complete all as specified and as directed by engineer-in-charge. 8 supply only chain link ms galvanised fencing incl line wire mesh ( 12 gauge ) size and any type of strands, rails, straining bolts etc incle provn of binding wire complete all as specified and as directed by engineer-in-charge. 9 fixing only chain link fencingany mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire complete all as specified and as directed by engineer-in-charge. 10 m&l for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl ms wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed by engineer-in-charge. 11 s&f galvanised 2 strand, steel barbed wire 2.24mm dia, narbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, inlc securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc. complete all as specified and as directed by engineer-in-charge. note:- ( each line of wire to be measured. ) 12 m&l two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth complete all as specified and as directed by engineer-in-charge. 13 dismantling ms worksof any desc. not otherwise provided for all as specified and as directed by engineer-in-charge. 14 demolition of brick work or stone / boulder masonry including all quoins, arches, pillars etc , precast concrete articles and precast concrete block wallingbuilt in cement mortar complete all asspecified and directed by engineer-in-charge. 15 m & l for brick work in burnt brickwith sub class b brick straight or curved on plan exceeding 6 m mean radius and built in cm 1:6 complete all as specified and directed. 16 m&l for rendering 15mm thick in cement mortar ( 1:6 ) on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by engineer-in-charge. 17 m&l for preparing new plastered surfaces & applying two coats of premium acrylic smooth exterior paint with silicone additives on external surfaces of wall including primer and preparation of surfaces as per manufacturers instruction all as specified and directed by engineer-in-charge. 18 s & f framed work as in doors or gates of angle or other section with gusset plates, rail, braces, etc, complete, drilled for fixing of steel sheeting or other concering. doors, etc. to be prepared for hangingor sliding with and including either hooks and hinges or steel hanging door gfitting ( exclusive of steel sheeting or other covering , running rails and guides ) and hanging , also fastening and fixing complete confirming to fe-410 w ( gde e-250 ) complete all as specified and as directed by engineer-in-charge