tender for painting work on delhi kanpur road; 1 providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement: 3 coarse sand ) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5mm ) , including making drainage opening wherever required complete etc. as per direction of engineer-in-charge ( length of finished kerb edging shall be measured for payment ) . ( precast c.c. kerb stone shall be approved by engineer-in-charge ) . ( as per dsr-2021 sl. no.-16.69 ) 2 12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. ( as per sor-2022 sl. no.-584 ) 3 repainting and relettering of k.m. stones as per irc design ( except 5th km. stone ) with approved enamel paint of superior quality including supply of all materials, labours and t & p etc. required for proper completion of the work ( sor 2022 si no.- 21.08 ) 4 removing paint or varnishing with paint remover or with caustic soda, including supply of all materials, labour, tools & plant etc. required for proper completion of the work. ( sor 2022 si no.- 15.17 ) 5 providing wall putty on old surface with approved quality material of berger / j.k. / birla or similar make 2 coats. ( sor 2022 si no.- 15.22 new item ) 6 painting or varnishing with valsper or other approved high grade enamel or superior synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, tools & plants etc. required for proper completion of the work. paint to be used should confirm is 105 / 106 / 133-1950.above but for every subsequent coat on previously treated ( sor 2022 si no.- 15.07+15.08 )