tender for pt. deendayal upadhyay r.m. inter college tenduakaji laboratory ( physics science ) development block-dostpur- 1 cleaning jungle i / c uprooting of rank vegitation, grass brush wood, tree and sapling of girth up to 30 cm measured at a height of 1 m above ground level and remoovel of rubbish upto distance of 50 mas per sl no 2.31 2 earth work in surface excavation not exceeding 0.30m and above in depth but exceeding 1.50 m in width as well as 10 sqm on plan i / c getting out and disposal of excavated earth upto 50m and lift upto 1.50m as directed by engineer in charge 2.1.1 all kind of soil as per si no - 2.6.1 3 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto the plinth level 1:6:12 ( 1 cement: 6 c sand : 12 brick aggregate 40 mm nominal size ) as per sl no - 273 4 brick work with common burnt clay ( non modular ) bricks of class -150 in foundation and plinth in cement mortar 1;6same as per sl no 6.1.2 5 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto the plinth level 1:1.5:3 ( 1 cement: 1.5 c sand : 3 stone aggregate 20 mm nominal size ) as per sl no - 4.1.2 6 centering and shuttering i / c strulting, propping etc. and removal of form work for - column, piers , aboutments, post, and struts same as per sl no - 5.9.5 7 e / w in cutting and filling in mix soil i / c a cortage of 1 km distance including all complete of work. 8 brick work with common burnt clay ( non modular ) bricks of class -150 super structure in cement mortar 1;6same as per sl no 6.4.2& 6.5 9 brick work with common burnt clay ( non modular ) bricks of class -150 super structure in cement mortar 1:4same as per sl no 6.4.1& 6.5 10 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto the plinth level 1:1.5:3 ( 1 cement: 1.5 c sand : 3 stone aggregate 20 mm nominal size ) as per sl no - 4.2.2 11 centering and shuttering i / c strulting, propping etc. and removal of form work for - column, piers , aboutments, post, and struts same as per sl no - 5.9.20 12 m.s. of iron workin plain work such as reinforcement concrete / brick work ( when not included in over all rates ) wrought to required shapes as necessary including bending for proper completion of the work and including supply of steel, its westage and hooks and authoriesed over lapping shall be measered ….as per rate analysis based on sail latest rate 13 steel work welded in built up sections / framed work, i / c cutting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar , ladder, railings, brackets grates and similar works same as per sl no - 10.25.2 14 providing & fixing 1 mm thk ms sheet doors &windows with frame of 40x40x6mm angle iron, and 3 mm gusset plates at the junctions and corners all necessary fittings complete i / c applying a priming coat of approved steel primer same as per sl no - 10.5.1 15 providing and fixing isi marked flush door shutters confurming to is 2202 ( part-1 ) non decorative type core of block board construction i / c all etc. completed -30 mm thk i / c isi marked stainless steel but hingh with neccessorysl no 9.21.2 & 9.26 16 providing & fixing isi marked oxidised ms handle conferming to isi 4992 with neccessory screws etc completed 17 providing & fixing isi marked bright finish tower bolt with neccessory screws etc completed 18 12mm thick cement plaster of mix 1:6 cementc-sand i / c al etc. required for proper comletion of work as per si no.13.4.2 19 cement concrete flooring in 1:2:4 ( 1 cement: 2 c sand : 4graded stone aggregate 20 mmsize ) finish with a floating coat of neat cement i / c cement slurry but excluding the cost of noising of steps etc completed - 40 mm thk with 20 mm nominal size of stone aggregate as per sl no - 11.3.1 20 fixing panesof glass2.8to 3.7mm with aual or equivalent isi marked quality putty brads and springs complete. 21 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto the plinth level 1:4:8 ( 1 cement: 4 c sand : 8 brick aggregate 40 mm nominal size ) as per sl no - 4.1.8 22 finishing wall with premium acrylic smooth exterior paint with silicon additives or required shade, new work two or more coat applied @ 1.67 ltr / 10 sqm over and priming coat….as per pwd specification of ayodhya scheduled item no.13.46.1 23 paint or venishing new iron work or new wood work withone coat priming and two coat of approved paint i / c all material labour t&p ….as per pwd specification 15.1.1 scheduled item no. 641 & 642 24 providing and fixing of 110 mm outer dia . pvc pipe 6 kg / cm2 pressure i / c all etc completed 25 providing and layingrectified glazed ceramic floor tiles of size 300x300 mm or more ( thickness to specified by the manufacturar ) of ist quality conforming to is 15622 of the approved brand and manufacture in all colour and shade laidon 20mm thk cement mortar 1:4 joint with grey cement slurry @ 3.3 kg / sqm i / c grouting the joint with white cement with matching pigments etc. completed size of tile - 600x600 mm same as per sl no - 11.39 26 wiring point for light in pvc conduit with 1.5 sqm. fr pvc insulated multistarand copper conductor cable as earth wire drawn inside the conduit. si no. 131 © 27 wiring point for fan / fresh air fan in pvc conduit with 1.5 sqm. fr pvc insulated multistarand copper conductor cable as earth wire drawn inside the conduit. si no. 133 © 28 s / f of power plug with 15 a / 250 v flush type switch & 5 pin 15 a / 250 v flush type universal socket. si no. 1139 29 s / f hexagonal fan box. as si no. 1149. 30 s / f of switch box of 16 swg dully painted with red oxide primer and flushed with wall.1203 31 s / f of batten / angle holder complete. si no. 405 32 s / f suface / flush mounting 4 ways spn distribution board ( legrand lexic ) with additional metal door with out mcb complete in all respect. si no. 1022 b 33 s / f of 6 amp to 32 amp spmcb ( 10 ka ) ( legrand lexic ) si no 1002 ( a ) . 34 provide and fixing of cpvc pipe having thermal suitability for hot and cold water supply, i / c all cpvc plain & brass threaded fitting i / c the fixing of pipe with clamp at 1.0 m spacing this i / c the joint of pipes & fitting one steps cpvc solvent cement and testing of joints complete with direction of engineer in charge - external work 15 mm nominal outer dia pipes 35 provide and fixing of cpvc pipe having thermal suitability for hot and cold water supply, i / c all cpvc plain & brass threaded fitting i / c the fixing of pipe with clamp at 1.0 m spacing this i / c the joint of pipes & fitting one steps cpvc solvent cement and testing of joints complete with direction of engineer in charge - external work 20 mm nominal outer dia pipes 36 provide and fixing of cpvc pipe having thermal suitability for hot and cold water supply, i / c all cpvc plain & brass threaded fitting i / c the fixing of pipe with clamp at 1.0 m spacing this i / c the joint of pipes & fitting one steps cpvc solvent cement and testing of joints complete with cost of cutting chases and making good the same direction of engineer in charge - internal work15 mm nominal outer dia pipes 37 provide and fixing of cpvc pipe having thermal suitability for hot and cold water supply, i / c all cpvc plain & brass threaded fitting i / c the fixing of pipe with clamp at 1.0 m spacing this i / c the joint of pipes & fitting one steps cpvc solvent cement and testing of joints complete with cost of cutting chases and making good the same direction of engineer in charge - internal work20 mm nominal outer dia pipes 38 providing & fixing of brass bib cock of approved quality -15 mm nominal bore 39 providing & fixing of brass stop cock of approved quality -15 mm nominal bore 40 provide and fixing wash basin with ci bracket 15 mm cp brass pillar traps32 mm cp brass waste of standard pattern i / c painting of fitting and brackets cutting and making good the walls whereever required - white vitreous china wash hand basin size 630x450 mm with asingle 15 mm cp brass piller tap.