annual plan-cherukunnu gp, project no. 72 / 2024-maintenance to ayurveda hospital at thavam-general civil work; 1 maintenance work 2 15.12.1:dismantling doors, windows and clerestory windows ( steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below 3 15.23.2:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles above 25 mm and up to 40 mm 4 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar 5 15.18:dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 6 od149547 / 2023-2024:laterite neatly dressed stones of size 35x20x20 cm or nearezt size in cement mortar 1:6 for superstructure above plinth level up to floor two level including cost of materials labour charges etc. complete. ( mod 50.6.7.2 of dar ) 7 14.1.1:repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:with cement mortar 1:4 ( 1 cement : fine sand ) 8 11.47.1:providing and laying vitrified tiles in different sizes ( thickness to be specified by the manufacturer ) , with water absorption less than 0.08% and conforming to is : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive ( water based ) conforming to is : 15477, in average 6 mm thickness, including grouting of joints ( payment for grouting of joints to be made separately ) .size of tile 500x500 mm 9 od149434 / 2023-2024:item shifted to sub head 14 as item 14.73 item shifted to head 14 as item 14.74 steel work welded in built up sections / framed work using departmental material, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works ( modified 10.25.2 ) 10 10.25.2:item shifted to sub head 14 as item 14.73item shifted to head 14 as item 14.74steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 11 50.14.1.1:removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site engineer-in-charge. 12 od149513 / 2023-2024:providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately ) , using departmental material ( modified 50.9.1.1 13 14.64.2:finishing walls with water proofing cement paint of required shade:old work ( one or more coats @ 2.20 kg / 10 sqm ) complete 14 13.48.1:finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm 15 13.61.1:painting with synthetic enamel paint of approved brand and manufacture to give an even shade:two or more coats on new work 16 21.1.1.2:providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is : 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminnium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. ( glazing, paneling and dash fasteners to be paid for separately ) :for fixed portionpowder coated aluminium ( minimum thickness of powder coating 50 micron ) 17 21.1.2.2:for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required ( fittings shall be paid for separately ) powder coated aluminium ( minimum thickness of powder coating 50 micron ) 18 21.2.2:providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is : 12823 grade i type ii, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer - in- charge.pre- laminated particle board with decorative lamination on both sides 19 21.3.1:providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer - in -charge. ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 4.0 mm thickness 20 21.12.2:providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with s.s. screws etc. complete as per direction of engineer -in-charge.powder coated minimum thickness 50 micron aluminium tubular handle bar 21 9.95.3:providing and fixing isi marked aluminium butt hinges anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete:100x75x4 mm 22 9.97.5:providing and fixing aluminium tower bolts, isi marked, anodised ( anodic coating not less than grade ac 10 as per : 1868 ) , transparent or dyed to required colour or shade, with necessary screws complete:100x10 mm 23 21.13:providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete 24 9.82:providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 25 9.84:providing and fixing aluminium extruded section body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm ) , with double speed adjustment with necessary accessories and screws etc. complete. 26 17.18.2:providing and fixing p.v.c. low level flushing cistern with manually controlled device ( handle lever ) conforming to is: 7231, with all fittings and fixtures complete.10 litre capacity - coloured 27 50.17.1.1:supplying and fixing stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge. 28 50.17.1.2:supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge. 29 50.17.1.4:supplying and fixing cp health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.