supply of rhode and schwarz power supply as per specification in tender supply of rhode and schwarz power supply as per specification in tender , supply of power supply (make :rohde &schwarz)as per specification given in tender , a) r&s®ngm202 battery simulation power supply 1)max. output power: 120 w 2)voltage per channel: 0 v to 20 v 3)max. current per channel: 6 a 4)500 ksample/s high-speed data logging 5)two-quadrant operation to function both as a source and a sink to simulate batteries and loads 6)voltage ripple and noise(20 hz to 20 mhz)< 500 ?v (rms) 7)current ripple and noise (20 hz to 20 mhz)< 1 ma (rms) 8)load recovery time< 30 ?s 9)programming resolution voltage:1 mv 10)programming resolution current:0.1 ma 11)readback resolution voltage: 5 v range: 5 ?v 12)10 ma range: 20 na b)battery simulation for ®ngm power supplies(unregistered license) model no:ngm-k106 make :rohde &schwarz , r&s®ngp824 isolated channel series parallel configurable power supply 1)max output power: 800 w(200wx 4 channels) 2)max. voltage per channel:64 v 3)max. current per channel: 10 a 4) 4 channels should be electrically equivalent and galvanically isolated and can be wired in series or parallel operation up to 250 v or 40 a 5)built in measurement functions with 1mv and 0.5ma resolution for each channel simultaneously 6)simultaneous voltage and current adjustment for all selected parallel and series connected channels 7)voltage ripple and noise (20 hz to 20 mhz)< 3 mv (rms) 8)current ripple and noise (20 hz to 20 mhz)< 3.5 ma (rms) 9)load recovery time< 400 ?s 10)readback accuracy voltage ±(% of output + offset)< 0.05 % + 10 mv 11)readback accuracy current ±(% of output + offset)< 0.1 % + 10 ma 12)measurement functions: voltage, current, power, energy 13)protection functions: ovp, ocp, opp, otp 14)data logging:yes 15)touch display:yes make :rohde &schwarz , r&s®rt-zvc02 multi-channel power probesfor r&s®rte1000 oscilloscope 1)2 high-sensitivity voltage and current channels 2)18-bit adc at 5 msample/s (for each channel) 3)1 mhz bandwidth with flexible filtering options 4) current ranges from 4.5 ua to 10 a with internal shunt and accessories a) r&s®rt-za33 oscilloscope interface cable (1 nos) b)r&s®rt-za30 extended cable(32cm) set for pcb probing, 1 current and voltage lead:2nos c)r&s®rt-za34 extended cable(1m) set for 4 mm probing, 1 current and voltage lead:2nosmake :rohde &schwarz