supply of handheld thermal imaging camera, battery analyzer, rms multimeter, as per specification given in tender , supply of items , handheld thermal imaging camera model: tis75+ or higher models handheld thermal imaging camera , model: tis75+ or higher models with minimum specifications as follows: 1 ) infrared resolution: 384x288 ( 110, 592 pixels ) , 2 ) spatial resolution:1.91 mrad, 3 ) frame rate: 9 hz 4 ) field of view: 42° x 30°, 5 ) minimum focus distance: 0.5m , 6 ) ir-fusion technology: autoblend continuous 0 % to 100 % , 7 ) temperature range :min-20 °c to 550 °c, 8 ) thermal sensitivity : =0.04 °c at 30 °c target temp ( 40 mk ) , 9 ) spot temperature: center spot, 10 ) spectral band: ~8.0 ?m to 14 ?m 11 ) standard color palettes: 6, 12 ) wireless connectivity: topc, wifi , lan, bluetooth, 13 ) display:minimum 3.5 ( 8.9 cm landscape ) touch screen 640 x 480 lcd, 14 ) warranty: minimum 2 years, 15 ) safety standars:iec 61010-1 deliverables to be included: a ) thermal imager with standard infrared lens , b ) two, rugged lithium-ion battery packs , c ) micro sd card , d ) ac powersupply ( including universal ac adapters ) , e ) usb cable , f ) software with life long free software upgrades. , g ) rugged , hard carrying case, h ) soft transport bag with adjustable hand strap. 15 ) software requirements: full analysis and reporting software to be includedin free of cost with the supply. 16 ) gaurantee: the equipment shall be guaranteed for trouble free performance and against any defects in material;workmanship;design and for any abnormal behaviour for period of not less than 18 months from the date of supplymake : fluke / flir / testo , battery analyzer model no:bt510 or higher models with minimum specifications as follows: 1 ) battery resistance range:3 mohm - 3000 mohm ( min. resolution of 0.001 mohm ) , 2 ) dc voltage range:6v-600v ( min. resolution of 0.001 mv ) , 3 ) ac voltage range :upto 600v ( min.resolution of 0.1 mv ) 4 ) frequency range : upto 500 hz ( min.resolution of 0.1hz ) , 5 ) ac voltage ripple ( 20 khzmax ) range:600mv-6000mv ( min. resolution0.1mv ) , 6 ) measurement modes: resistance ( mohm ) , battery voltage, voltage dc, voltage ac and frequency ( hz ) , ripple voltage , 7 ) safety compliance:600 v cat iii , 8 ) protection class 2: pollution degree ii package contents: a.battery analyser, b.4-wire test pin set, c.btl10 basic test lead set, d.tl175 twist guard test leads with adapter, e.bp500 7.4v 3000mah lithium ion battery, f.bc500 18v ac charger, g.mini-b usb cable h.shoulder strap, i.belt strap, j.magnetic hanging strap, k.soft carrying case, l.spare fuses ( 2 ) m.zero ohm calibration resistor make : fluke / hioki / any approved , industrial true rms multimeter model no: fluke 87v or higher models with minimum specifications as follows: 1 ) voltage ac / dc: upto 1000 v, 2 ) current ac / dc: upto 10a , 3 ) frequency: up to 200 khz, 4 ) resistance: 50 mohm, 5 ) capacitance: upto 10000?f, 6 ) duty cycle: upto 99.9%, 7 ) temperature range:-200.0 °c to 1090 °c, 8 ) safety specifications: en 61010–1 to 1000 v cat iii, 600v cat iv package content: 1 ) industrial multimeter, 2 ) tl75 test leads ( tl175 eur ) , 3 ) ac175 alligator clips, 4 ) holster with tilt-leg, test lead storage, 5 ) 9v battery ( installed ) , 6 ) 80bk temperature probe make : fluke