supply of gee bin distribution of 209 gee bins , geebin , 1.poly propylene co-polymer(ppcp) made 29 liter capacity bins(3 nos),each with a base ring,upper plate and filter plate and leachate tray is used for treating 2kg waste per day.2. one lid for covering the top most bins is provided.3. each bin has two parts.inner digester and outer covering bin as protective system which helps to prevent entering of flies and insects into the digester. 4. filter plates are fixed at the bottom of digester for easy drain of leachate.leachate trays are placed above the base ring. 5.base rings are provided for holding the upper bin duly meant for fixing the leachate tray and one upper ring for fixing the lid.infrastructure requirement: 1. inner digester bin dimensions are 331 mm dia, 335 mm height, 2.4 mm gauge. it is 29 liter capacity and having 2 mm dia holes all around for ventilation. 2.outer bin dimensions are 383 mm dia, 335 mm height. 2.4 mm gauge, 1.5 mm dia holes provided all around for ventilation. 3.upper plate is having 384mm dia, 51 mm height and 2.75 mm thickness for fixing the lid. 4.the base rings are having 2.75 mm gauge, 384 mm dia and center hole of 204 mm dia duly meant for fixing leachate tray and for holding the upper bin. 5.the leachate trays are having 204 mm dia, 23 mm height and 1.35 mm thickness fixed in the base ring. 6.the bins contains a lid 418 mm dia, 112 mm height, 2.6mm thickness and 2 mm dia holes are provided at 65 mm width all round for ventilation of hot air. 7.each inner & outer bins are vertically dived into halves. inner bin is assembled with 6 nut & bolts, and outer bin is assembled with 10 nut & bolts. 8.filter plates 320 mm dia, 2.4 mm thickness and the central portion 15 mm dia with 3mm dia holes for easy drain of leachate. 9.microbes enriched inoculum for water absorption and aeration. (starter) 10.tool (hand fork) for stirring the waste