tender for target for the year2023-24- iind phase 50% -fabrication of 11kv ‘v’ cross arm, back clamps for 11kv / 33kv ‘v’ cross arm, 1.8m channel cross arm, back clamps for ht cross arm, 11kv ‘f’ clamp, ht stay clamp and lt stay clamp at production shop, c.m.division, pallom-- 1 fabricating 11kv / 33kv v cross arm using 75x40mm / 100x50mm ms channel cutting by gas, bending into required shape and jointed by arc welding in both sides of each gas cutting portion including 2 nos of 50mm long ms flat 50x6mm wherever necessary on each ends and drilling 4nos. of 22mm dia holes and 2 nos of 18mm dia holes as per drawing including flux removal, stacking the finished goods in such a manner that item can be counted in numbersas per direction of departmental officers and as per drawings ( charges inclusive of labour, cutting gas, welding rod, punch & die, drill bits etc. ) complete. 2 fabricating back clamps for 11kv / 33kv v crossarm 44cm long using 75x8mm m.s.flat as per design and stacking the finished clamps in such a manner that the item can be counted in numbersas per direction of departmental officers. ( charges inclusive of shearing tools, punch & die etc. complete. ) 3 fabricating 1.8m channel crossarm using ms channel75x40 ( ismc 75 ) and with 21mm dia drilled / punched holes as per boardss specification and drawing, including gas cutting, levelling and stacking at suitable place as per the direction of the departmental officers ( charges inclusive of cost of labour & consumables, such as cutting gas, lpg, punch & die, drill bit etc. ) complete. ( 4296nos ) 4 fabricating back clamps for ht crossarms 40cm long using 75x8mm m.s.flat as per design and stacking the finished clamps in such a manner that the item can be counted in numbersas per direction of departmental officers. ( charges inclusive of shearing tools, punch & die etc. complete. ) 5 fabricating 11kv f clamp using ms flat 50x8mm, cutting, levelling, drilling holes, bending the top end for a length of 5cm and welding 5cm long 50x8mm flat to form f shape for holding insulator pin at top end as per boards design and drawing including stacking the finished products at suitable places in such a manner that the item can be easily counted in numbersas per direction of departmental officers. ( charges inclusive of labour and cost of welding electrode, welding tools, shearing tools, punch & die etc. complete. ) 6 fabricatinght stay clamps for ht stay rodsof351 mm long using50 x8 mm ms flat as per design and drawing including cutting, bending, punching 2 nos 18mm dia holes and stacking the finished products as per the direction of the departmental officers. ( charges inclusive of labour, shearing tool, punch & die etc. complete. ) 7 fabricatinglt stay clamps for lt stay rodsof326 mm long using50 x8 mm ms flat as per design and drawing including cutting, bending, punching 2 nos 18mm dia holes and stacking the finished products as per the direction of the departmental officers. ( charges inclusive of labour, shearing tool, punch & die etc. complete. )