procurement of glf spares procurement of glf spares , supply of 200 w, 6.6 abi-pin halogen lamp, osramcat no.64386 or philips / narvacat no. 58373 for papi / approach fixtures , supply of 150 w, 6.6 a, bi-pin halogen lamp narva make cat no. 58362suitable for use in aun type elevated runway edge / approach light fixtures , supply of 105 watt, 6.6 amps, prefocus dichroic coated reflector lamp, osram cat. no. 64339a or philips / narvacat. no. 58308, suitable for use in inset type glf fixtures , supply of 45w, 6.6 a single ended bi-pin halogen lamp, osramcat. no. 64321 or philips / narvacat. no. 58323 suitable for use in elevated type taxiway fixtures , supply of 7 w ( minimum 100 lumen per watt ) , 6500 k, 230 ± 10 volts, pin type led lamp. , supply of 1 x 6 sq.mm, 5 kv grade copper conductor, pvc insulated, pvc sheathed, single core, unarmoured anti-termite and anti-rodent treated ug afl cable confirming to relevant standard as amended up to date and as per specifications. , supply of 2 x 4 sq.mm., 0.6 / 1 kv grade copper conductor, pvc insulated, pvc sheathed, dual core, un-armoured anti-termite and anti-rodent treated ug afl cable confirming to relevant standard as amended up to date and as per specifications. , supply of 5kv grade 6 sq.mm plug & receptacle of type 1, class b, connector kit suitable for field attachment with 1x 6 sq.mm, copper conductor afl cable. , supply of epr self-amalgamating, moisture proof, ht insulating tape ( 38mm width, 0.75mm thick ) suitable for insulating & jacketing upto 11 kv system. ( min 9.1 mtr. per roll ) , supply of 45watt, 6.6 / 6.6 amp. rating 5 kv grade, 50 hz ac isolating transformer, series type, en-capsuled in polyster resin, finally moulded in neoprene type rubber with primary and secondary leads, confirming to latest specifications as required suitable for airfield lighting applications etc. as required , supply of 300 watt, 6.6 / 6.6 amp. rating 5 kv grade, 50 hz ac isolating transformer, series type, en-capsuled in polyster resin, finally moulded in neoprene type rubber with primary and secondary leads, confirming to latest specifications as required suitable for airfield lighting applications etc. as required , supply of 200 watt, 6.6 / 6.6 amp. rating 5 kv grade, 50 hz ac isolating transformer, series type, encapsuled in polyster resin, finally moulded in neoprene type rubber with primary and secondary leads, confirming to latest specifications as required suitable for airfield lighting applications etc. as required , supply of 100 watt, 6.6 / 6.6 amp. rating 5 kv grade, 50 hz ac isolating transformer, series type, encapsuled in polyster resin, finally moulded in neoprene type rubber with primary and secondary leads, confirming to latest specifications as required suitable for airfield lighting applications etc. as required , supply of 2 core x 4 sqmm moulded secondary connector ( length not less than 14 ) with plug at one end ( male type ) , supply of 2 core x 4 sqmm moulded secondary connector ( length not less than 14 ) with socket at one end ( female type ) , supply of bi pin halogen lamp holder suitable for 200 / 45 watt, 6.6 amp., suitable for use of all halogen type hirl / mirl airfield lighting fittings , supply of reflector for ama make apn type approach fitting.. , supply of clear lens for ama make apn type approach fitting , supply of reflector for ama make papi fitting , supply of clear lens for ama make papi fitting , supply of b - connector / four-way terminal for ama make taxiway / approach light fittings , supply of 1 phase, 50 hz, 24 hrs base / din mounting analog timer , supply of wind cone indicator fabric of size 3.75 mtr in length and 0.9 mtr in throat diameter, colour in alternative band of white and red, material in cotton or synthetic or a blend of two as per standard required for illuminated wind cone