repair work of shamshan ghat, kabristan and barat ghar in village - bodaki, greater noida repair work of shamshan ghat, kabristan and barat ghar in village - bodaki, greater noida , dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within50 metres lead. ( dsr-13 / 15.56 / p-253 ) , dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of: , asbestos sheet ( dsr-13 / 15.28.2 / p-250 ) , 12mm cement plaster of mix: 1:6 ( 1 cement : 6 coarse sand ) ( dsr-13 / 13.4.2 / p-222 ) , brick work with bricks of class designation 150 in superstructure above plinth level upto floor v level in all shapes and sizes in: , cement mortar 1:6 ( 1 cement : 6 coarse sand ) ( dsr-13 / 6.4.2 / p-111 ) , half brick masonry with bricks of class designation 150 in foundation and plinth in: , cement mortar 1:4 ( 1 cement : 4 coarse sand ) . ( dsr-13 / 6.12.2 / p-112 ) , centring and shuttering including strutting, propping etc. and removal of form for: , lintels, beams, plinth beams, girders, bressumers and cantilevers. ( dsr-13 / 5.9.5 / p-97 ) , reinforced cement concrete work in walls ( any thickness ) , including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level, excluding cost of centring, shuttering, finishing and reinforcement: ( cast-in-situ ) , 1:1½:3 ( 1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size ) ( dsr-13 / 5.2.2 / p-96 ) , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. , thermo-mechanically treated bars / cold twisted bars. ( dsr-13 / 5.22.6 / p-99 ) , providing precast cement concrete jali 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size ) , reinforced with 1.6 mm dia mild steel wire, including centring and shuttering, roughening cleaning, fixingand finishing in cement mortar 1:3 ( 1 cement : 3 fine sand ) etc. complete excluding plastering of the jambs, sills and soffits. , 50 mm thick ( dsr-13 / 5.18.1 / p-99 ) , providing non-asbestos high impact polypropylene reinforced cement 6mmthick corrugated sheets ( as per is : 14871 ) roofing upto any pitch and fixing with polymer coated j, or l hooks, bolts and nuts 8mm dia, g.i. plain and bitumen washers or with self drilling fastener and epdm washers etc. complete ( excluding the cost of purlins, rafters and trusses ) , including cutting sheets to size and shape wherever required. ( dsr-13 / 12.8 / p-205 ) , finishing walls with water proofing cement paint of required shade : new work ( two or more coats applied @ 3.84 kg / 10 sqm. ) ( dsr-13 / 13.44.1 / p-225 ) , painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade: one or more coats on old work. ( dsr-13 / 14.54.1 / p-242 ) , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level: ( cast-in-situ ) , 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size ) . ( dsr-13 / 4.1.8 / p-85 ) , kota stone slab flooring over 20mm ( average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of 1:4 cement mortar 1:4 ( 1 cement : 4 coarse sand ) . , 25mm thick. ( dsr-13 / 11.26.1 / p-190 ) , kota stone slabs 20mm thick in risersof steps, skirting, dado and pillars laid on 12mm ( average ) thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. ( dsr-13 / 11.27 / p-190 ) , providing and laying 80mm thick i.s.i. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of engineer-in-charge with conforming to is-15658 and irc:sp:63. ( ar / gnida ) , distempering with oil bound washable distemper of approved brand and manufacture to given an even shade: old work ( one or more coats ) ( dsr-13 / 14.45.1 / p-241 ) , clearing grass and removal of the rubbish upto a distance of 50m outside the periphery of the area cleared. ( dsr-13 / 2.32 / p-75 ) , tractor trolley with driver and including pol ( ar / gnida ) , supply of labour ( ar / gnida ) , providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350mm and 340 x 410 x 265mm sizes respectively. ( dsr-13 / 17.23 / p-290 ) , providing and fixing wash basin with c.i. brackets, 15mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: , white vitreous china wash basin size 630x450 mm with a pair of 15mm c.p. brass pillar taps. ( dsr-13 / 17.7.1 / p-288 ) , providing and fixing pvc waste pipe for sink or wash basin including pvc waste fittings complete. , semi rigid pipe : 32mm dia. ( dsr-13 / 17.28.1.1 / p-291 ) , providing and placing on terrace ( at all floor levels ) polythylene water storage tank, isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. ( dsr-13 / 18.48 / p-327 ) , providing and fixing c.p. brass bib cock of approved quality conforming to is: 8931: 15mm nominal bore ( dsr-13 / 18.49.1 / p-327 ) , providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms. 15 mm nominal bore ( dsr-13 / 18.51.1 / p-328 ) , providing and fixing c.p. brass stop cock ( concealed ) of standard design and of approved make conforming to is: 8931: 15mm nominal bore ( dsr-13 / 18.52.1 / p-328 ) , providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is: 8931 : 15mm nominal bore ( dsr-13 / 18.53.1 / p-328 ) , providing and fixing 1st quality ceramic glazed wall tiles conforming to is : 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, inskirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. ( dsr-13 / 11.36 / p-191 ) , providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete ( new work ) . , 15 mm nominal bore ( dsr-13 / 18.46.1 / p-327 ) , providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete ( new work ) . , 20 mm nominal bore ( dsr-13 / 18.46.2 / p-327 ) , add labour cess @ 1% on all above items