tender for ayar uppadhyan link road. 1 earth work in cutting or filling in embankment in ordinary soil excavation to be the form of regular pits not exceeding ½ meter ( 20” ) in depth and earth work in enbankment to be in 20cm ( 8” ) layers, including ramming and dressing the surface to required levels and slopes and also including 1.5m ( 5” ) lift and 30m ( 100’ ) lead. the earth form cutting to be used in making embankent or to be deposited as spoil banks within 30m ( 100’ ) distance as directed by the e / i. ( including all taxes but excluding gst ) 2 construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with smooth mord specific. ations 401 ( including all taxes but excluding gst ) 3 providing, laying, spreading and compacting of sukrut stone stone aggregates of specific sizes to water bound macadam specification ( g-2 ) including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kn in stages to proper grade and camber, mord specific ations 405.2 ( including all taxes but excluding gst ) 4 providing, laying, spreading and compacting of sukrut stone aggregates of specific sizes to water bound macadam specification ( g-3 ) including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kn in stages to proper grade and camber, mord specific ations 405.3 ( including all taxes but excluding gst ) 5 brick edging on both side of road with first class brick 8 cm. ( 3” ) wide 12 cm. ( 4.50” ) deep laid with mud mortar including all materials, lab our, t & p etc. complete. ( including all taxes but excluding gst ) 6 providing and applying primer coat with bitumen emulsion ( ss ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per sqm using mechanical means as per technical specification clause 502 ( including all taxes but excluding gst ) 7 providing and applying tack coat with bitumen ( vg-10 ) usingdistributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503. ( including all taxes but excluding gst ) 8 providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm -11.2 mm aggregatesusing penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, by manual mord specific. 508 ( including all taxes but excluding gst ) 9 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall usingtype c as per technical specification clause 510 ( including all taxes but excluding gst )