30118/01/e3 provisioning of office and accommodation at op locations chushot palam and spituk parkha and pre-fabricated shelters at khardungla at air force station leh , part-i: essential details of items / stores / services required for porta cabin. (a) supply, transportation and installation of prefabricated flat pack modular high altitude containerized living shelter of size 6.00 mtr x3.00 mtr upto height of 2.90 mtr (b) internal size -size 5.84 mtr x 2.84 mtr x 2.70 mtr. detail tender drawings are provided along with revised rfp (c) anchorage if necessary to stabilize the structure due to wind load shall be provided by vendor. (d) the shelter should be able to be easily dismantlable for transportation. (e) the shelter parts like floor. walls, roof etc. should be capable of assembling & disassembling by 5-6 men & hydra crane in 7-8 hrs. puf flooring incl all fixing arrangements complete all as per specifications mentioned in tender documents and as directed by engineer-in-charge at site: note :- the rate of hardware and sealant is deemed to be included in the said item. s & f plywood 19 mm thick, grade bwr, type bb,fixed with screwsto timber frame work or steel frame workcomplete all as specified and directed.s & f 2 mm thick aluminium chequered plate sheet on flooringcomplete all as specified and directed.s & f 80 mm thick puf wall panels incl all fixing arrangements complete all as per specifications mentioned in tender documents and as directed by engineer-in-charge at site: , (b) part -ii: sanitary fittingsstainless steel premium /1st quality wash down water closet ewc closed pattern incl all necessary accessories like rag bolts/ gel gasket etcwith cover complete alll as specified.s & ffor pvc low level flushing cistern of 10 ltrs capacity syphonic action type white body with intel ball valve float and handle including bracket and flush pipe etc complete and connecting to wc with pvc flushing pipe and pvc connection 450 mm long.s & f 15mm dia stop valves cast copper alloy, fancy type,chromium plated with long shank and cup screwed down high press with crutch or butterfly handle both ends for iron pipe s & f 15mm dia bib taps cast copper alloy fancy type with crutch or butterfly handle screwed down , screwed for iron pipe or union. note : also specified in rfp and asdirected by engr-in-charge , (c) part -iii: electric supplys & felectric items. internal electrification of the shelter shall be carried out all as perisi marked. details of electric fillitngs are as under:- (a) db’s spn 8 way 240v (qty-01 nos) make: havells / bajaj / crompton / phillips(b) mcb spn 32 a 240 volt (qty-01 nos)make : havells / bajaj / crompton / phillips(c) mcb spn 6 to 32 a 240 volt(qty-06 nos)make : havells / bajaj / crompton / phillips (d) point wiring for light/fan/bell(qty-10 nos) make : finolex/polycab/plaza (e) point wiring for 5 amp socket outlet on independent board(qty- 4 points) make : finolex/polycab/plaza (f) point wiring for 5 amp socket outlet on same board(qty - 2 points) make : finolex/polycab/plaza (g) point wiring for 15 amp socket outlet on independent board(qty - 2 points) make : finolex/polycab/plaza (h) switch piano 5 amp (qty – 15 nos) m note: aslo specified in rfp and as directed by engr-in-charge (j)material. all material required for the manufacturing of shelters will be new and will comply with relevant is as applicable and those given succeeding para. the building shall be considered and manufactured as per is: 875 for structural design. steel used shall be conforming to is: 2062/2011 for steel for general structural purposes. the material should provide insulation against extreme cold weather condition. => limited