BRR : 1387023
Tender Brief : Material Supply For Mgnregs Works Ward No 4, 5, 6, 7, 8 Material Supply For Mgnregs Works Ward No 4, 5, 6, 7, 8 , 100 Mm Channel Shoulder 2.5 M Long , 20 Mm Dia Holding Down Bolts , 200 Mm Aluminium Aldrop , Bitumen Washer , Coarse Sand ( Zone Iii ) , Corner Angle 45X45x5 Mm 1.50 M Long , Deharadun White Lime , Diesel Oil , Double Clip ( Bridge Clip ) , Mild Steel Round Bar 12 Mm Dia And Below , Fine Sand ( Zone Iv ) , Flats Exceeding 10 Mm In Thickness , White Washer , G.I Limpet Washer , G.I Pipes 50 Mm Dia , G.I. Pipes 25 Mm Dia , Safeda Ballies 125 Mm Diameter , Se... Read More
Tender Value
₹
Ref. Document
Contract Value
₹ 80,00,000
Submission Date
23-11-2021
Contract Date
02-02-2022
Completion Date
90 days
Participated Bidder List
2 No of Bidder(s)
| Sr No. | Bidder Name | Bid Analytics | Technical Bid | Financial Bid | AOC | Bid Value | Rank |
|---|---|---|---|---|---|---|---|
| 1 | cnet-technologies | Bid Analytics | 69,77,306.47 | L1 | |||
| 2 | cnet-technologies | Bid Analytics |
Work Detail
material supply for mgnregs works ward no 4, 5, 6, 7, 8 material supply for mgnregs works ward no 4, 5, 6, 7, 8 , 100 mm channel shoulder 2.5 m long , 20 mm dia holding down bolts , 200 mm aluminium aldrop , bitumen washer , coarse sand ( zone iii ) , corner angle 45x45x5 mm 1.50 m long , deharadun white lime , diesel oil , double clip ( bridge clip ) , mild steel round bar 12 mm dia and below , fine sand ( zone iv ) , flats exceeding 10 mm in thickness , white washer , g.i limpet washer , g.i pipes 50 mm dia , g.i. pipes 25 mm dia , safeda ballies 125 mm diameter , second class kail wood in scantling , second class kail wood in planks , g.i. pipes 40 mm dia , galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots , galvanised steel j or l hooks 8 mm dia , galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm , gi trafford profile sheet 0.35mm thick , hire charges of concrete mixer 0.25 to 0.40 cum with hopper , hire charges of diesel road roller- 8 to 10 tonne , interlocking c.c. paver block ( 80 mm thick, m-30 ) , m.s. tube 40 mm dia , mild steel plates , mild steel rivets , mild steel tubes hot finished welded type , plastic emulsion paint , acrylic exterior paint , exterior primer , ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc. , ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black , vitreous china orrisa type w.c. pan size 580 mm , ordinary portland cement ( grade 43, confirmig to is8112 ) , white cement , pressed clay tile 20mm thick 25*25mm size , pvc bend 63mm dia ( isi certified ) , pvc elbow 63 mm dia ( isi certified ) , pvc end cap 63mm dia ( isi certified ) , pvc pipe 63mm outer dia ( isi certified ) , pvc tee 63*63*63mm ( isi certified ) , quarry waste , red oxide zinc chromate primer , with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron / steel works , single clip , solid blocks of size 30x20x15cm , stone aggregate ( single size ) : 06 mm nominal size , stone aggregate ( single size ) : 10 mm nominal size , stone aggregate ( single size ) : 40 mm nominal size , stone aggregate ( single size ) :20 mm nominal size , bamboo 25 mm dia 2.5metre long , bamboo / kallanmula , stone for masonry work , structural steel such as tees, angles, channels and r.s. joists , structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete , adjustable telescopic prop 3 m ( 2.02-3.75m ) e , beam clamp 300-380 mm ( 450- 1070 mm , vitrified floor tile 60x60 cm s , twisted steel / deformed bars ( grade fe500 d ) , hire charge of 10 hp engine and pump set , vibrator ( needle type 40 mm ) , wall form panel 1250x500 mm , water tank , water thinnable cement primer for interior wall surface, having voc content less than 50 gms / litre , stainless steel screw 50 mm , welding by electric plant , wire nails
View Original Notice/Document
Result Documents
Tender Documents
| Download | File Name | File Description |
|---|---|---|
| Download | 05295c45-4199-4bb5-bb49-35eb3ac5523a |
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender
✦ ✦ ✦
Awarded Bidder(s)
1
cnet-technologies
Rank : L1 (Lowest)
Bid Amount :
₹
1,00,00,000
Similar Tenders Results