microscope with integrated camera microscope with integrated camera , microscope with integrated camera , technical specifications • led illumination with continuous intensity adjustment ( life of more than 20000 hrs ) • 5 fold nosepiece objectives should be inward inclined, • objectives –achromat 4x / 0.10, 10x / 0.25, 20x0.40, 40x / 0.65, 100x / 1.25 oil • 30 degree binocular tube ( ipd 52 - 75 mm ) . • eyepiece pair – 10x / 20 fn with eyepiece locking screw, foldable eye guards • condenser : abbe condenser 0.9dry / 1.25 oil • low position and self adjusting focusing mechanism. 300 microns per fine focus rotation. calibrated in 3 microns increments . • hard anodized and rack less stage • one hand slide loading, 26x76mm stage travel • antimicrobial treated with proper documents • integrated vertical handle for easy lifting and storage. • integrated cord warping facility. • machine have auto cut off facility after 2 hours if not in use • upgradable for phase contrast, dark field and fluorescence with minimum 3 filter block / turret • point counting and non point counting mechanical stages • hard anodized stage surface • brake for securing rotation location camera with software • camera should be integrated • camera situated between binocular tube and objective. • hd mode for live image 1920x1080 directly to an hd display or for image capture to sd card ( no pc required ) • pc mode for use with pc and imaging software •network mode for direct connection using ethernet cable • light distribution: 50% visual / 50% camera • interfaces: usb2, hdmi, ethernet maximum image size 5.0 m pixel ( 2592 x 1944 ) complete camera kit contains camera module, usb2 cable 1.8m, hdmi cable 2.5m, imaging software for basic image capture and simple measuring and annotation applications, • branded pc : 4gb ram, 1tb hdd, 1 gb graphics card, i5 64 bit processor , • windows 10 ( original ) • microscope camera and software should be same make.