purchase of tools and equipment required for survey lab and transportation engineering lab under the civil engineering dep-1.01 vernier transit theodolite ( babir-vtto1 ) - resolving power 4, field of view 2.6 m at 100m, material aluminium, short focus 1.5m, stadia ratio 1100, length 178 mm magnification 25x, effective aperture 38mm, circle diameter hz113mm, v100mm. 1.02 dumpy level -levelling range -1km, longest focusing distance 200 / 300 mtr objective aperture 40 mm stadia constant 1:100 addition constant 0 bubble sensitivity 20” / 2 mm nominal accuracy 2-3 mm / km weight 2.650 kg. 1.03 cbr apparatus ( is 2720-part xvi ) - 50 kn capacity. table top type -mould and proving ring with standard calibration chart and all accessories. 1.04 marshall stability apparatus -50 kn capacity. analogue type with proving ring and dial gauge. it consists of three cylindrical moulds 10.16 cm dia x7.6 cm high with base plate and extension collars, a specimen extractor, two hammers ( 4.5 kg ) with standard calibration chart. 1.05 test sieve ( is 460 ) 20mm dia -brass made -one set- ( 4.75mm, 2.36mm, 1.18mm, 0.600mm0, 0.425mm, 0.300mm, 0.150mm, 0.075mm ) . 1.06 test sieve ( is 460 ) 30mm dia –g i made -one set- ( 75mm, 50mm, 40mm, 37.50mm, 25mm0, 20.00mm, 12.50mm, 10.00mm, 4.75mm ) 1.07 elongation index gauge- ( length gauge ) -brass type-is2386. 1.08 thickness gauge- flakiness index- brass type-is2386. 1.09 automatic bitumen compactor of fully automatic type. ( the drive mechanism lift the weight of 4.5 kg and drop height 457mm ) . standards bs 598-107. 1.1 standard tar viscometer- is 1206 ( part 1 ) -consists of a chrome plated copper bath with cup of 10mm orifice and sleeve with lifting clip and ball and it operate on220 volt ac mains. ring and ball apparatus- is 1205 consists of steel bracket with sliding plate support, a central hole on this plate for inserting thermo meter. it consists of tampered ring -2 nos, 1.11 ball centring guide-2 nos. steel ball of 9.5mm dia & magnetic stirrer with heating facility. 1.12 bitumen ductility testing machine- is 1208 -testing range1.5-2m, rotating shaft speed 5 cm / min. the briquette is stretched rate of 50 mm / min. it consist of a water bath with thermostatic heater and circulating pump .it operate on 230 v and inner material is stainless steel.