e tender for the office modernization work at manjeswaram, kasargode , hardwood / rub wood u shaped conference table ( u shape -1no, rectangle table-2 nos ) providing and fixing hardwood / rub wood u shaped conference table, material and construction shall be as follows, • hardwood legs and frame work three side and inner shelves covered with 18mm a+a grade, thickening1st quality rub wood top with 18mm a+a grade. • by using the base as mrf polishing materials. neatly spray polishing 2 or 3 cots of matt finished spray. • size of the table are 365 x 120 x 78cm , hard wood tea poy with velvet , vertical blinds , teak wood veneer wall panelling sheet providing and fixing wall panelling, material and construction shall be as follows, • hardwood framework insides with marine ply of 12mm panelling with levelling of wall surface. • levelling the wall surface providing and fixing ost ply ( 1st quality waterproof one side teakwood vinegar ply ) on the top including teakwood plank moulding and designing work on the side of the panelling for better finishing look. • by using the base as mrf polishing materials. neatly spray polishing 2 or 3 cots of matt finished spray. • fitted with proper screws and gums ( frame distance 25cm each ) . • wood protector chemical spraying in the frame. • teak wood panelling designed panels fitted with top of wooden frame suitable steel nils, screw and gums. • top of panelling top end area horizontally designed with teakwood planks panelling insides with eco damping glass wool system installed. , window curtain -677x228 cm ( cloth ) providing and fixing window curtain ( cloth with steel rod ) , material and construction shall be as follows, • by using 1st quality cloth of woven fabric fitted with supporting 16 gauge stainless steel 304 pipe and sockets. , gypsum roof ceiling including ceiling painting -providing and fixing in true horizontal level 600mm x 600mm. ceiling system manufactured using • hot dipped galvanized true steel ( gyproc channel ) section, exposed surface with percolated capping main tee of size 24 x 32mm. having 0.27mm gauge at every 1200mm centre maximum and tottery stitched cross tee of size 2427mm, having 0.25mm gauge at every 600mm c / c and wall • the above grid is suspended at every 1200mm c / c in both direction using 2mm thick pre straightened gl wire laying fine fissured butt edge ceiling tiles manufactured of size 600x600x15mm having n.r.co.55, light reflectance of >84% ( wt ) thermal conductivity k=0.052 – 057w / mok, humidity resistance of 99.9% having fire performanceclass o / classi ( bs4760 ) • surface having 3 coats of white paint with fine fissured, back of the tile duly sanded and finished with a 3 coat of protective paint ( asian paints apex ultima brilliant white ) over the formed grid complete. • providing gyproc 1st quality mr waterproof sheet , hard wood partition 320x120 cm & 310 x120 cm. hardwood legs and frames with particle board. , rubwood movable rack 45x45x122 cm