supply and fixing of materials for general maintenance work of non residential building at raj bhawan , lucknow-1 repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground all complete as per direction of e / i.with cement mortar 1:4 ( 1cement :4 coarse sand ) dar 14.1.2 2 fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 ( 1 cement : 3 coarse nsand : 6 graded stone aggregate 20 mm nominal size ) , painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge. n door chowkhats dar 14.2.1 3 fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) , painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge. nwindow chowkhats dar 14.2.2 4 renewing glass panes, with putty and nails wherever necessary including racking out the old putty: float glass panes of nominal thickness 4 mm ( weight not less than 10kg / sqm ) 14.5.1 5 renewing glass panes, with wooden fillets wherever necessary: n14.6.1 float glass panes of nominal thickness 4 mm ( weight not less than 10kg / sqm ) 6 providing & fixing white vitreous china water closet squatting pan ( indian type ) along with s or p trap including dismantling of old wc seat and s or p trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i / c malba, all complete as per the direction of engineer-in charge. orissa pattern w.c pan of size 580x440 mm 14.80.2 7 dismantling 15 to 40 mm dia g.i. pipe including stacking of dismantled pipes ( within 50 metres lead ) as per direction of engineer-in-charge. ( a ) internal work- exposed on wall dar 14.84 8 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require white vitreous china flat back wash basin size 550x 400 mm with single 15 mm c.p. brass pillar tap dar 17.7.4 9 providing and fixing stainless steel kitchen sink ( cera make ) size 610x510x200mm without drain board with c.p. jali, pvc waste pipe, brackets including supply of all materials, labour , t&p etc. required for proper completion of the work.dsr 17.10.2.1 n 10 providing and fixing white vitreous china pedestal type ( european type / wash down type ) water closet pan. dar 17.15 11 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer - in - charge. dar 17.16a 12 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. semi rigid pipe 32mm dia / 40mm dia dar 17.28.1 13 providing and fixing 600x450 mm beveled edge mirror of superior glass ( of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete 17.31 14 providing and fixing in position pre-cast r.c.c. manhole cover and frame of required shape and approved quality m d - 10 nsquare shape 450 mm internal dimension 19.19.2.1 15 providing and fixing in position pre-cast r.c.c. manhole cover and frame of required shape and approved quality circular shape 500 mm internal diameter 19.19.2.2 16 providing and fixing 15 mm dia nominal bore g.i. pipes complete with g.i. fittings and clamps, i / c cutting and making good the walls etc. internal work - exposed on wall dar 18.10.1 17 providing and fixing 20 mm dia nominal bore g.i. pipes complete with g.i. fittings and clamps, i / c cutting and making good the walls etc. internal work - exposed on wall dar 18.10.2 18 providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 : 15 mm nominal bore 18.49.1 19 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15mm nominal bore 18.53.1 20 providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : ( a ) first layer of slurry of cement @ 0.488 kg / sqm mixed with water proofing cement compound @ 0.253 kg / sqm. this layer will be allowed to air cure for 4 hours. ( b ) second layer of slurry of cement @ 0.242 kg / sqm mixed with water proofing cement compound @ 0.126 kg / sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. the rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry 22.5 21 renewal of old putty of glass panes ( length ) 14.9 22 providing and fixing brass bib cock of approved quality : n 15 mm nominal bore 18.15.1 23 providing and fixing ball valve ( brass ) of approved quality, high or low pressure, with plastic floats complete : 15 mm nominal bore 18.18.1 24 providing and fixing ball valve ( brass ) of approved quality, high or low pressure, with plastic floats complete : 20 mm nominal bore 18.18.2 25 providing and fixing brass stop cock ( 15mm dia 400gms ) heavy quality . dsr 18.16.1 26 supply and fixing of sluice valve 100mm dia ( zolota ) as per iss 750 & 155 2906 class- ( mec ) isi including matel labour t&p etc. required for proper completion of work as per direction of e / i.... dsr 18.31.1.2 27 providing and fixing of single lever basin mixer with 450 mm ( cat no.-f2011461 - cera ) including supply of all material labour t&p etc. required for porper completion of the work. dsr 14.62.1 28 providing and fixing of hand shower ( health faucet ) abs body with wall hook ( cera make cat no. f8030102 ) including supply of all material labour t&p etc. required for porper completion of the work. ( dsr 18.15.1 29 providing and fixing urinal ( sensor ) of size 360x330x740mm calcia efs-ivory ( cat no. s4010101 ( cera make ) with fitting, standard size c.p. brass flush pipe, with unions and clamps ( all in c.p. brass ) with waste fittings as per is: 2556, making good the walls and floors wherever required dsr 17.4.1 30 providing and fixing isi marked brass door handle with nuts and bolts 200 mm long 31 providing and fixing of jet spray including supply of all material labour t&p etc. required for proper completion of the work. 32 providing and fixing isi marked brass door stopper with nuts and bolts 33 providing and fixing isi marked brass hinge 75 mm long 34 providing and fixing isi marked brass hinge 125 mm long 35 providing and fixing isi marked brass sliding bolt16mm dia nuts and bolts 300 mm long 36 providing and fixing isi marked brass tower bolt10 mm dia nuts and bolts 600 mm long 37 providing and fixing isi marked brass tower bolt10 mm dia nuts and bolts 150 mm long 38 providing and fixing isi marked brass door handle with nuts and bolts 100 mm long 39 providing and fixing isi marked brass door handle with nuts and bolts 200 mm long 40 providing and fixing isi marked brass hinge 75 mm long 41 providing and fixing isi marked brass hinge 125 mm long 42 providing and fixing isi marked brass door stopper with nuts and bolts 43 providing and fixing brass bib cock heavy quality .15mm dia 400 gms dsr 18.15.1