tender for developing plots in layout scheme 01 prilimary survey and marking 02 earthwork and levelling for bitumen road 03 site preparation and subgrade compaction for bitumen road and greenary 04 bitumen road laying involves constructing flexible pavements by placing and compacting bituminous layers over a prepared base. a prime coat enhances adhesion on the granular base, and a tack coat is used between bituminous layers. 05 earthwork, levelling and foundation preparation for drain work 06 the rcc drain work consists of constructing a reinforced cement concrete drain with an inner width of 370 mm, inner depth of 700 mm, and 150 mm thick side walls to efficiently collect and convey stormwater. reinforcement fixing, formwork, concreting, curing, and backfilling to provide a durable and long-lasting drainage system that protects the roadway from water damage 07 the hume pipe culvert work involves laying rcc hume pipes beneath road junctions to connect the roadside water drains and ensure uninterrupted across the road. stormwater flow 08 the street lighting system consists of the installation of 105 nos. lamp posts id 5 strategically located throughout the plot layout to provide adequate illumination for roads and common areas. 09 the overhead water tank consists of 2 nos. rcc overhead tanks, each having a 50,000- litre capacity, constructed to provide adequate water storage and maintain continuous water supply for the residential plot layout