supply of set of hardness cable for wap-7 , supply of set of harnessed cables to clw spec. no. clw/es/03/0646, alt.-f wit h (i) plw requirement of harness cable for wap7 locomotive to annexure-a3 rev.-02 dat ed 18.03.2026 (ii) clw str no. clw/(2017)/eldo/(e)/str/01, rev-0 and installation/laying out of set of harnessed cable with other associated items (to be supplied by plw) as per so r plw/el/harnessed cables & cable tray/sor/004, dated:21.05.2024. notes: 1. following items to be supplied along with tendered item. (i) 3 pin cable connector female suitable to 2.5 sq m m cable mg 00f 16-10s b051 c30 003e of m/s allied electronics corporation or equivalent. (ii) 3 pin rectapcle connector male suitable to 2.5 sq mm cable mg 06f 16-10p c30 of m/s allie d electronics corporation or equivalent. 2. one set of tendered items to be sent to plw f or sample approval after inspection by nominated agency before bulk supply. if any mo difications/ changes are suggested by plw during sample approval, then firm shall hav e to carry out the modifications/changes as per plw requirement in the complete suppli es. 3. evaluation of bids will be done purely on the basis of combined rate quoted for supply as well as installation/laying out of set of harnessed cables. 4.following adde ndum is incorporated to para 6.2 of sor plw/el/harnessed cables & cable tray/sor/004, dated:21.05.2024 delay beyond ten working days from the allowed time for installatio n/laying out of harnessed cable shall be considered as failure of the supplier as per t erms and conditions of the contract and plw would reserve the right to forfeit 20% b alance payment against the material supplies for the corresponding qty. of harnessed cable sets. [ warranty period: 30 months after the date of delivery ] ]