tender for reconstruction of tank sluice (head and wing wall type) chainage 2.0m @ vengamur eri in vengamur panchayat in kanai block , reconstruction of tank sluice (head and wing wall type) chainage 2.0m @ vengamur eri in vengamur panchayat , dismantling clearing away and carefully stacking material usefull for reuse for any thickness of walls in brick or stone massonry in cement mortar walls under 3m height including all labour charges etc complete , dismantling clearing away and carefully stacking materials useful for re-use, for any thickness in plain cement concrete including all labour charges etc complete , dismantling clearing away and carefully cut stone fully dressed , earth work excavation and depositing on banks with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff block cotton soil, hard red earth shals murrums gravel, stoney earth and earth mixed with 50% fair sized boulders and hard gravelly soil ss 20 b including all labour charges etc complete , first depth 0.00- 0.30m , iind depth 0.30- 0.60 m , iiird depth 0.60m above , cement concrete 1:4:8 using 40mm iss size hand broken granite stone jelly including labour charges for mixing concrete watering and laying the concrete in layers not more the 15 cm thick compacting etc complete complying with standard specification etc complete , supplying and erecting steel centering for sides and soffits including all support with all cross bracing using mild steel of size 90cm x 60cm 10 guage stiffened with welded mild steel angle of size 25x25x3mm for boarding and providing silver oak joist 75cm x 5cm spaced at about 45cm c/c and supported by casurina,d below gl upto 3m height. including all labour charges etc complete , below gl , above gl , cement concrete : 1:2:4 with broken stone jusing 20mm gauage machine broken hbg metal including cost and conveyance and all labour charges etc.complete. , supplying fabricating and placing in position of m.s or rts rod for all reinforced cement concrete works as per design including cost of steel and binding wire. including all labour charges etc complete , rainforcement cement concrete 1:1.5:3 using 20 mm iss hbg metal for all reinforced cement concrete item of works excluding cost of reinforcement and fabricating charges, centering and shuttering but icluding curing and providing fixtures like fan clamps in the reinforced cement concrete floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams, etc., shall be finished smooth with cement mortar 1:3, 12mm thick and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. , fabricating, supplying and erection of screw gearing steel shutters of size up to 1.00 m width made out of 8mm thick mild steel plates and 65x65x6mm mild steel angle for outer frame with equal spacing made out of same section and 8 mm mild steel plate for gusset plate 2 nos of size 0.30 x 0.23 m with required bolts and nuts etc, and erection of shutter in position at site with all accessories and conveying and leading the shutter to the site. the rate to include dismantling the old shutter from the vent, including the power required, conveyance of equipments to site, loading of dismantled materials after completion of work, transporting to stores, unloading and stacking. the shutter shall be finished with one coat of anticorrosive black paint over one coat of red oxide paint. the rate shall include petty civil work and trial operation and all taxes etc, complete. , fabricating supplying and fixing of shutter groove angle made out of 65 x 65 x 6mm mild steel angle with required height including welding of holdfast of size 25x25x6mm mild steel angle 2 nos on each side and including petty civil works and painting with one coat of anticorrosive black paint over one coat of red oxide primer etc, including dismantling the old groove angle conveying, loading and unloading and stacking to section store etc, complete. , fabricating, supplying and fixing of screw rod 50mm, dia mild steel round rod duly machined and fully threaded to suit the capstan head assembly with required bolt and nut, fastened with eye plate of the shutters including greasing, etc including dismantling old screw rod conveying, loading and unloading and stacking to section store etc., complete. , fabricating, supplying and fixing of top beam made out of 150 x 75mm (ismb 150) duly drilled to suit the head set assembly with required bed bolt made out of 25mm mild steel round rod duly threaded with suitable anchorage arrangements to a height of 0.90m with necessary fish plate made out of 8mm m.s plate of size 0.23 x 0.30m 2 nos to place the beam in position including petty civil works and painting one coat of anticorrosive black paint with one coat red oxide primer etc, including dismantling old beam conveying, loading and unloading and stacking to section store etc, complete. , fabricating, supplying and erection of cast iron head set assembly light duty with hexagonal nut (approximate 50 kg) duly machined with nut, threading to suit the screw rod with including cost of ball bearings for smooth operation cost of grease, one coat of anticorrosive black paint over one coat of red oxide primer. the cost shall include required handle for shutter operation including dismantling the existing head set assembly and conveying to the store and stacking including loading and unloading charges etc, complete. , provision for ring bund charges , towards name board charges , towards photography charges