tender for providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (wmm) specification including premixing the material with water at omc in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of morth specifications. , providing and laying prime coat of 7 kgs/10 sqm over the wmm surface treated with primer using 7 kgs of bituminous emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 502 of morth rev v specifications , providing and laying tack coat over wmm surface using 2.50 kg bitumen emulsion (rs1) per ten square meters for preparatory to another bituminous construction over it including cost of material,labour charges, rental for machinery,fuel and all other incidental charges etc., complete as per clause 503 of morth rev-5 , providing and laying tack coat of 2kgs/10 sqm over the bituminous surface treated with binder using 2 kgs of bituminous emulsion (rs) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of morth specifications , providing and laying 50mm consolidated thick dense bituminous macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20kgs of vg30/vg40 bitumen for premixing per 10sqm including cost and conveyance of all materials to cmp site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to th