tender for providing supply arrangement to newly constructed loni hospital, tq. warud, dist. amravati.--supplying and erecting gi sheet 1.6mm (16 swg) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in marathi, hindi and english erected at position for hv/ehv (11000 volts) installation with compliance to is 2551-1982 supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. oh-pl/rsj (11 mtr*4 no + 10 mtr stud*4 nos) supplying and erecting bracket for guarding of ht oh line, made from channel iron 1600mm in length and 75x40x6mm. erected on pole complete as per specification no. oh-pl/vca supplying and erecting v cross arm with ism channel of 75x40x6mm for 11kv ht oh line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1220mm bent at angle of 60 degree keeping base 305mm and the total vertical height of v cross arm as 460mm, and fixed on pole with ms clamp of 80x10 mm, nut bolts, washers complete as per specification no. ohpl/ vca supplying and erecting 75x40 x6mm with 4.4mm thick web and 7.3mm thick flange channel (top pin) with clamp of suitable length so as to maintain vertical clearance of 1065mm for 11kv, 1320mm for 22kv between insulators for erection of top pin insulators complete as per specification no. oh-pl/vca supplying & erecting single pole cut point channel set of for 11kv ht oh line two channel of size 100x50x6mm 1.6m long having stud angle of size 50x50x6mm 1.5m long with necessary clamps, nut bolts etc. complete as per drawing. supplying and erecting acsr conductor of size 6/1-3.60 mm complete. (ferret) (171.3 kg/km) as per specification no. oh-con/acsr supplying and erecting porcelain disc type insulator 45kn with necessary hardware suitable for 11kv line, complete as per specification no. oh-ins/di supplying and erecting porcelain pin type insulator with gi pin suitable for 11kv line, complete as per specification no. oh-ins/pn supplying and erecting g.i. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6 mm., straining screws, g.l. stay wire 7/8 swg, g.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete. supplying and fixing ms base plate 30x30x0.6cm size fixed to the pole base either by welding 12mm dia fixed at position. supplying and erecting guarding lace for ht oh line with 8swg g.l. wire to protect the ht oh line with binding wire of 20swg g.l. wire for 75mm section on either side.