bids are invited for bolster for press tool 9911837443 bolster for press tool size 1500 l x 800w x 100mm t - bolster for press tool size 1500 l x 800w x 100mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defects edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled. , 9911839677 bolster for press tool size 1000 l x 200w x 75 mm t - bolster for press tool size 1000 l x 200w x 75 mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out. supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled. , 9911839678 bolster for press ttool size 1200 l x 700 w x 100mm t - bolster for press tool size 1200 l x 700 w x 100mm t tolerance +-2mm, material grey cast iron to spec is 210 of 1993 grade fg-200, the casting shall be sound, clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other ,any welding / repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled. , 9911837447 bolster for press tool size 800 l z 800 w x 100 mm t - bolster for press tool size 800 l z 800 w x 100 mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tear, cold shuts distortions sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled. , 9911839351 bolster for pres tool size 1500 l x 1000 w x 100mm t - bolster for pres tool size 1500 l x 1000 w x 100mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortions sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled. , 9911839352 bolster for press tool size 1200 l x 1000 w x 100mm t - bolster for press tool size 1200 l x 1000 w x 100mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled. , 9911839675 bolster for press toll size 400 l x400w x 75mm t - bolster for press toll size 400 l x400w x 75mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled. , 9911837438 bolster for pres tool size 400 l x 350 w x 50 mm t - bolster for pres tool size 400 l x 350 w x 50 mm t tolerance +-2mm, material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled. , 9911837448 bolster for press tool size 1200l x 600 w x 100 mm t - bolster for press tool size 1200l x 600 w x 100 mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled. , 9911839114 bolster for press tool size 1000 l x 800 w x 100 mm t - bolster for press tool size 1000 l x 800 w x 100 mm t tolerance +-2mm material grey cast iron to spec is 210 of 1993 grade fg-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . supplier must submit test report of material for physical and chemical properties from approved nabl lab with ultrasonic test. bolster shall be well dressed and fettled. total quantity : 30