tender for e-bid for rate contract cum supply and empanelment of surgical items , absorbable gelatin sponge ip 66, size 80(+-10) mm x 50 mm x 10 mm should be sterlized. , surgical blade sterile, size 22 • single peel pack in metal foil • the tip of the blade shall be well defined, central and sharp. there shall be no waviness, jags, feathers, nicks, or other defects on the cutting edge. the surfaces of the blade shall be smooth and free from tool marks and any sign of corrosion. • as per is 3319 (bis mandatory) , tracheostomy tube (pvc), plain, sterile, single use - all sizes • soft flexible flange at for easy fixation • 15 mm connector at terminal end which can be rotated in 360 degree direction • non-irritant • radio-opaque line , tracheostomy tube (pvc), cuffed, sterile, single use - all sizes • soft flexible flange at for easy fixation • 15 mm connector at terminal end which can be rotated in 360 degree direction • non-irritant • radio-opaque line • balloon with non return valve , k wire, length 375 mm; 1mm length of wire should be mentioned with specification. as per is 8261 , k wire, length 375 mm;1.6mm • length of wire should be mentioned with specification. • as per is 8261 , k wire, length 375 mm; size 1.8mm • length of wire should be mentioned with specification. as per is 8261 , face mask, disposable • should be manufactured from non woven poly prop fabric • should be 3 ply construction • should have high bacterial filtration efficiency • should be heat sealed to keep 3 layers together • standard size 17.5 x 9 cm • color green/blue • there should be a string each at all four corners, length of string should be 40cm • nose clip should be there • no elastic band. should bear bis certificate of is 16289:2014 , foldable intra ocular lense with injector (size + 11 d to +17.5 d) size:6mm optics. 12-13mm total diameter 1. made of foldable acrylic (hydrophobic) material 2. bi-convex single piece iol with aspheric optics 3. size:6mm optics. 12-13mm total diameter. 4. modified c loop haptic/plate haptics ( 5. iol should have uv blocking capability 6. iol should have 360°square edge.. 7. foldable and insertion by injector with disposable / prelaoded cartridge insertable by a sub 2.8 mm incision size or smaller incision 8. diopters- + 11 d to +17.5 d at 0.5 d step. 9. supplying unit should be iso accredited and iol should be ce/us fda certified. 10. a-constant 118 to 120: its the nearest a constant of natural human eye, which assure not have haloes and glare. , foldable intra ocular lense with injector (size + 24.5 d to + 28.5 d ) size:6mm optics. 12-13mm total diameter 1. made of foldable acrylic (hydrophobic) material 2. bi-convex single piece iol with aspheric optics 3. size:6mm optics. 12-13mm total diameter. 4. modified c loop haptic/plate haptics 5. iol should have uv blocking capability 6. iol should have 360°square edge.. 7. foldable and insertion by injector with disposable / preloaded cartridge insertable by a sub 2.8 mm incision size or smaller incision 8. diopters- + 24.5 d to + 28.5 d at 0.5 d step. 9. supplying unit should be iso accredited and iol should be ce/us fda certified. 10. a-constant 118 to 120: its the nearest a constant of natural human eye, which assure not have haloes and glare. , standard pmma intra ocular lenses (size + 11 d to +17.5 d) • 6mm optic size 12.5 - 13.0 mm total diameter, biconvex 1. pmma optics and haptics single piece with hole 2. 6mm optic size 12.5 to 13mm total diameter, biconvex 3. iol haptics - modified c shaped with 5° -10° anterior angulation. 4. should have 360° square edges. 5. iol should have uv blocking capability 6. diopters- + 11 d to +17.5 d at 0.5 d step. 7. supplying unit should be iso accredited and iol should be ce/us fda certified. , standard pmma intra ocular lenses (size + 24.5 d to + 28.5 d ) 6mm optic size 12.5 - 13.0 mm total diameter, biconvex 1. pmma optics and haptics single piece with hole 2. 6mm optic size 12.5 to 13mm total diameter, bioconvex 3. iol haptics - modified c shaped with 5° -10° anterior angulation. 4. should have 360° square edges. 5. iol should have uv blocking capability 6. diopters- + 24.5 d to + 28.5 d at 0.5 d step. 7. supplying unit should be iso accredited and iol should be ce/us fda certified. , rubber examination gloves made of natural rubber latex. non-sterile, ambidextous, aql 1.5 micro textured powdered with absorbable dusting powder usp. extra small. should bear bis certificate of is 15354 ce marked/iso 13485 (for importer) , rubber examination gloves made of natural rubber latex. non-sterile, ambidextous, aql 1.5 micro textured powdered with absorbable dusting powder usp. small should bear bis certificate of is 15354 ce marked/ iso 13485 (for importer) , rubber examination gloves made of natural rubber latex. non-sterile, ambidextous, aql 1.5 micro textured powdered with absorbable dusting powder usp. large should bear bis certificate of is 15354 ce marked/ iso 13485 (for importer) , umbilical cord clamp • suitable for clamping umbilical cord of new born • security lock to prevent accidental opening after clamping • grooved clamping area , surgical blade sterile, size 23 • single peel pack in metal foil • the tip of the blade shall be well defined, central and sharp. there shall be no waviness, jags, feathers, nicks, or other defects on the cutting edge. the surfaces of the blade shall be smooth and free from tool marks and any sign of corrosion. • as per is 3319(mandatory) , vascular catheter 7fr-16 cm with chlorhexidine, silver sulfadiazine coated triple lumen usfda/four digit notified ce approved. introducer needle 18 g., spring guide wire 45 cm j tip, dilator 8.5 fr., raulerson spring introduction syringe 5 ml , elastic adhesive bandage bp 10 cm x 1 mtr stretched length adhesive material should have good quality sticking property, non-allergic , niv mask (noninvasive ventilation mask) adult • should be light weight silicon based full face & nasal mask with face &forehead soft cushion pads for adults in large size. should be with ergonomically designed clips/straps for easy disengagement of the head gear. should be single use for ventilator without vent. non allergic, leak proof, contour should be maintained. should have variable in flatable cushion. ce usfda approved demo required , niv mask (noninvasive ventilation mask) adult • should be light weight silicon based full face & nasal mask with face &forehead soft cushion pads for adults in large size. should be with ergonomically designed clips/straps for easy disengagement of the head gear. should be single use for bipap with vent.non allergic, leak proof, contour should be maintained. should have variable in flatable cushion. ce usfda approved demo required , niv mask (noninvasive ventilation mask) adult • should be light weight silicon based full face & nasal mask with face &forehead soft cushion pads for adults in large size.should be with ergonomically designed clips/straps for easy disengagement of the head gear. should be single use for bipap with vent.non allergic, leak proof, contour should be maintained. should have variable in flatable cushion. ce usfda approved demo required , niv mask (noninvasive ventilation mask) adult • should be light weight silicon based full face & nasal mask with face &forehead soft cushion pads for adults in medium size.should be with ergonomically designed clips/straps for easy disengagement of the head gear. should be single use for bipap with vent. non allergic, leak proof, contour should be maintained. should have variable in flatable cushion. ce usfda approved demo required , niv mask (noninvasive ventilation mask) paediatric • should be light weight oro nasal mask with soft cushion pads in small size • should be with ergonomically designed clips/straps for easy disengagement of head gear • should be single use with bronchoscopy port co2 &o2 port with chin support • non allergic, leak proof, contour should be maintained , nebulization mask paediatric 1. compatibile with any standard nebulizer/high/flow oxygen. 2. made of transparent ,soft,clear,non-toxic, non-irritant , latex free material. 3. storage humidity range = 90%rh 4. soft, kink resistant minimum 2 meter long non- collapsible extension on tubing to be connected with nebulizer/oxygen source. 5. consist of paediatric mask with pull through elastic strip to hold in place. 6. anatomically contoured for comfort /nose clip on mask preferable. 7. should have leak/spillage proof nebulizer chamber. 8. the mask nebulizer chamber and tubing should be sterilizable . 9. should with stand gas flow of at least 10ltr/min. 10.particles sizes should be below 5 microns if used with oxygen or nebulizer 11. nebulizes 3cc within 10 minutes.