bids are invited for mill fabrication work 1 , mill fabrication work 2 , mill fabrication work 3 , mill fabrication work 4 , mill fabrication work 5 , mill fabrication work 6 , mill fabrication work 7 , mill fabrication work 8 , mill fabrication work 9 , mill fabrication work 10 , mill fabrication work 11 , mill fabrication work 12 , mill fabrication work 13 , mill fabrication work 14 , mill fabrication work 15 , mill fabrication work 16 , mill fabrication work 17 , mill fabrication work 18 , mill fabrication work 19 , mill fabrication work 20 , mill fabrication work 21 , mill fabrication work 22 , mill fabrication work 23 , mill fabrication work 24 , mill fabrication work 25 , mill fabrication work 26 , mill fabrication work 27 , mill fabrication work 28 , mill fabrication work 29 , mill fabrication work 30 , mill fabrication work 31 , mill fabrication work 32 , mill fabrication work 33 , mill fabrication work 34 , mill fabrication work 35 , mill fabrication work 36 , mill fabrication work 37 , mill fabrication work 38 , mill fabrication work 39 , mill fabrication work 40 , mill fabrication work 41 , mill fabrication work 42 - mill fabrication work 1 - dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and install a new pipeline (8inch). , mill fabrication work 2 - dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and install a new pipeline (6inch). , mill fabrication work 3 - dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and install a new pipeline (4inch). , mill fabrication work 4 - dismantle the damaged pipeline at various locations in the mill house, place it in the scrap yard, and install a new pipeline (3inch). , mill fabrication work 5 - fabricate and install bends at various locations in the mill house (6inch). , mill fabrication work 6 - fabricate and install bends at various locations in the mill house (4inch). , mill fabrication work 7 - fabricate and install flanges at various locations in the mill house (10inch). , mill fabrication work 8 - fabricate and install flanges at various locations in the mill house (8inch). , mill fabrication work 9 - fabricate and install flanges at various locations in the mill house (6inch). , mill fabrication work 10 - fabricate and install flanges at various locations in the mill house (4inch). , mill fabrication work 11 - fabricate and install flanges at various locations in the mill house (3inch). , mill fabrication work 12 - fabricate and install nipples at various locations in the mill house (8inch). , mill fabrication work 13 - fabricate and install nipples at various locations in the mill house (6inch). , mill fabrication work 14 - fabricate and install nipples at various locations in the mill house (3inch). , mill fabrication work 15 - fabricate and install nipples at various locations in the mill house (1inch). , mill fabrication work 16 - fabricate and install reducers at various locations in the mill house (8inch). , mill fabrication work 17 - fabricate and install reducers at various locations in the mill house (6inch). , mill fabrication work 18 - replace the damaged side plates and bottom plates of the cane carrier, leveler, chopper, secondary rake carrier, and rake carrier with the supplied plates (6/8/10 mm thick plates). , mill fabrication work 19 - cut and remove the old runners of the cane carrier, secondary rake carrier, and inter rake carrier, and install new runners. , mill fabrication work 20 - remove the corroded angles, beams, and channels beneath the runners of the cane carrier supporting angle, secondary rake carrier, and inter rake carrier, and install new angles in their place. , mill fabrication work 21 - cut and remove the old trough of the inter rake carrier and secondary rake carrier installed in the mill house, fabricate and install a new trough using the supplied 8/10 mm plate as per instructions, and conduct a satisfactory trial. , mill fabrication work 22 - cut, remove, reinstall the mill hole trough. , mill fabrication work 23 - cut and remove the tray beneath the mill trpf, fabricate and install a new tray using the supplied 10/12 mm thick plate, and conduct a satisfactory trial. , mill fabrication work 24 - fabricate new juice rings for the mill rollers using 6/8 mm thick plate as per the s le. , mill fabrication work 25 - dismantle the damaged side plate of the fibrizer, place it in the scrap yard, fabricate and install new side plates using the supplied 8/10 mm thick plate as before, and conduct a satisfactory trial. , mill fabrication work 26 - cut and remove the worn bed of the tail shaft of the secondary rake carrier and fabricate and install a new one using a supplied 200 mm beam. , mill fabrication work 27 - fabricate and install a new guard for the mill crown pinion and place the old damaged guard in the scrap yard. , mill fabrication work 28 - remove the damaged angles of the side plates of the cane carrier, secondary rake carrier, and inter rake carrier, and install new angles in their place. , mill fabrication work 29 - remove the damaged juice tray of the trpf rollers installed on the mill head stocks, place it in the scrap yard, fabricate a new tray from the supplied 8/10 mm plate, and install it in its original position. , mill fabrication work 30 - remove the 12inch size header installed on the mill screen juice line, fabricate a new header as per the s le, complete all connections as before, and conduct a satisfactory trial. , mill fabrication work 31 - fabricate a new delivery header for the screen juice tank (10inch size, 2.1 m length) along with 8 and 10 nipples, fabricate and erect it as per the s le, and conduct a satisfactory trial. , mill fabrication work 32 - cut the damaged top cover of the mill trpf, cut the supplied 8/10 mm plate, fabricate it as per the s le, install it in its original position using the supplied 8/10 mm plate. , mill fabrication work 33 - dismantle the trpf bottom cover of mill no. 2, place it in the scrap yard, fabricate a new cover from the supplied 8/10 mm plate, install it in position, and conduct a trial. , mill fabrication work 34 - dismantle the weak and damaged plates on both sides and the back of the chute of mill no. 2 trpf installed in the mill house, place them in the scrap yard, fabricate and install new plates using the supplied 10/12 mm thick plate as before, and conduct a satisfactory trial. , mill fabrication work 35 - remove the old and damaged rail of the crane unloader trolley, install the supplied new rail (40 x 40 mm), strengthen it, and conduct a trial. , mill fabrication work 36 - fabricate and install new covers for the mill bearing housing. , mill fabrication work 37 - fabricate and install the juice distribution tray in the pipeline of the mill juice pumps. , mill fabrication work 38 - carry out welding of the mill trpf rollers and repair by installing and welding the cut side plate. , mill fabrication work 39 - repair the racks of the secondary and inter rake carriers. , mill fabrication work 40 - weld the cut tail bar of the mill and fabricate it to the required size. , mill fabrication work 41 - carry out pineapple chevron grooving and cutting work on the mill rollers. , mill fabrication work 42 - carry out on-site forging of the side links of the cane carrier, bagasse carrier, elevator, and rbc chain, and fit pins and bushes as required to achieve the specified size.