supply of gauge for buffer spindle body , gauge for buffer spindle body. dia - 40 mm. wear limit - 5 mm. required size: nogo - 35.00 m m (snap type) ref. drg. no. w/bd - 353 material tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 month s after the date of delivery ] ] , gauge for buffer spindle body. dia - 40 mm. wear limit - 5 mm. required size: nogo - 35.00 m m (snap type) ref. drg. no. w/bd - 353 material tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 month s after the date of delivery ] ] , gauge for bent link stem. dia - 42 mm. required size - nogo - 39.0 mm (snap type) ref. drg. no. rdso - sk - 79068 alt-08 & sk 99002 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 month s after the date of delivery ] ] , gauge for bent link stem. dia - 42 mm. required size - nogo - 39.0 mm (snap type) ref. drg. no. rdso - sk - 79068 alt-08 & sk 99002 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 month s after the date of delivery ] ] , gauge for hole on straight link. 47 mm dia hole. required size - nogo - 49.0 mm (flat type) r ef. drg. no. rdso- sk - 79068 alt-08 & sk- 99002 material - tool steel, is 3748/90 hardness - 50/55 hrc. sup ply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 3 0 months after the date of delivery ] ] , gauge for hole on straight link. 47 mm dia hole. required size - nogo - 49.0 mm (flat type) r ef. drg. no. rdso- sk - 79068 alt-08 & sk- 99002 material - tool steel, is 3748/90 hardness - 50/55 hrc. sup ply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 3 0 months after the date of delivery ] ] , gauge for draft width. required size: nogo 40.0 mm (flat type) ref. drg. no. rdso sk 79062 alt- 05 & 99007 material tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - val id for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , gauge for draft width. required size: nogo 40.0 mm (flat type) ref. drg. no. rdso sk 79062 alt- 05 & 99007 material tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - val id for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , gauge for buffer plunger tube wall thickness 9 mm. wear limit - 4 mm. required size: nogo 5. 0 mm (snap type) ref. drg. no. w/bd - 355 & 359 and sk 94255 & sk 94256 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , gauge for buffer plunger tube wall thickness 9 mm. wear limit - 4 mm. required size: nogo 5. 0 mm (snap type) ref. drg. no. w/bd - 355 & 359 and sk 94255 & sk 94256 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , gauge for hole on straight link. 61 mm dia hole. required size - nogo - 63.0 mm (flat type) r ef. drg. no. rdso- sk - 79068 alt-08 & sk-99002 material - tool steel, is 3748/90 hardness - 50/55 hrc. supp ly with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , gauge for hole on straight link. 61 mm dia hole. required size - nogo - 63.0 mm (flat type) r ef. drg. no. rdso- sk - 79068 alt-08 & sk-99002 material - tool steel, is 3748/90 hardness - 50/55 hrc. supp ly with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , gauge for trunnion 76 mm thickness. required size - nogo - 72 mm (snap type) ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material tool steel, is 3748/90 hardness - 50/55 hrc. supply with cali bration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months aft er the date of delivery ] ] , gauge for trunnion 76 mm thickness. required size - nogo - 72 mm (snap type) ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material tool steel, is 3748/90 hardness - 50/55 hrc. supply with cali bration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months aft er the date of delivery ] ] , gauge for plunger face/face plate 19 mm. wear limit - 11 mm. required size - 1905 mm curvat ure gauge with 16 depth measurement ref. drg. no. w/bd - 355 & 359 and sk 94255 & sk 94256 material - t ool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , gauge for plunger face/face plate 19 mm. wear limit - 11 mm. required size - 1905 mm curvat ure gauge with 16 depth measurement ref. drg. no. w/bd - 355 & 359 and sk 94255 & sk 94256 material - t ool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , gauge for draft key slot width - 38 mm, required size: nogo-40.0 mm (flat type) ref. drg. no . rdso sk 79063 alt-4 & sk 99007 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 month s after the date of delivery ] ] , gauge for draft key slot width - 38 mm, required size: nogo-40.0 mm (flat type) ref. drg. no . rdso sk 79063 alt-4 & sk 99007 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 month s after the date of delivery ] ] , gauge for 62 mm dia pin hole of draw hook. required size - nogo - 65.0 mm (flat type) ref.d rg. no. rdso sk 79062 alt-05 & 99007 material tool steel, is 3748/90 hardness - 50/55 hrc. supply with cali bration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months aft er the date of delivery ] ] , gauge for 62 mm dia pin hole of draw hook. required size - nogo - 65.0 mm (flat type) ref.d rg. no. rdso sk 79062 alt-05 & 99007 material tool steel, is 3748/90 hardness - 50/55 hrc. supply with cali bration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months aft er the date of delivery ] ] , gauge for bottom side of shank - 56 mm height draw hook, required size: nogo - 41.0 mm (s nap type) ref. drg. no. rdso sk 79062 alt-05 & 99007 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , gauge for bottom side of shank - 56 mm height draw hook, required size: nogo - 41.0 mm (s nap type) ref. drg. no. rdso sk 79062 alt-05 & 99007 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , gauge for shank body 39 mm, required size: nogo-36.0 mm (snap type) ref. drg. no. rdso s k 79063 alt-4 & sk 99007 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration cert ificate valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , gauge for shank body 39 mm, required size: nogo-36.0 mm (snap type) ref. drg. no. rdso s k 79063 alt-4 & sk 99007 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration cert ificate valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , gauge (go & nogo) for bent link u-gap - 78 mm (gauge for screw coupling) required size: go - 77 mm & nogo - 85 mm ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material - tool steel, is 3748/9 0 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approve d lab [ warranty period: 30 months after the date of delivery ] ] , gauge (go & nogo) for bent link u-gap - 78 mm (gauge for screw coupling) required size: go - 77 mm & nogo - 85 mm ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material - tool steel, is 3748/9 0 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approve d lab [ warranty period: 30 months after the date of delivery ] ] , profile gauge with - 15 mm. adjustable projection for root of the hook near the point of contact with bent link (gauge for draw hook). ref. drg no. rdso - sk - 79062 alt-05 & 99007. material tool steel. is - 3748/90,hardness - 50 / 55 hrc supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , profile gauge with - 15 mm. adjustable projection for root of the hook near the point of contact with bent link (gauge for draw hook). ref. drg no. rdso - sk - 79062 alt-05 & 99007. material tool steel. is - 3748/90,hardness - 50 / 55 hrc supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warranty period: 30 months after the date of delivery ] ] , k- thread profile gauge (ring gauge type) for screw. size - 55 x 6.35 mm - k/thread. go & no go gauge. wear limit - 1 mm ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material - stainless steel & hardened. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warra nty period: 30 months after the date of delivery ] ] , k- thread profile gauge (ring gauge type) for screw. size - 55 x 6.35 mm - k/thread. go & no go gauge. wear limit - 1 mm ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material - stainless steel & hardened. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab [ warra nty period: 30 months after the date of delivery ] ] , k- thread profile gauge (plug gauge type) for trunnion - lh/rh. size - 55.635 x 6.35 mm - d/th read. go & nogo gauge. wear limit - 1 mm ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material - st ainless steel & hardened. supply with calibration certificate - valid for min. 01 year issued from nabl approv ed lab [ warranty period: 30 months after the date of delivery ] ] , k- thread profile gauge (plug gauge type) for trunnion - lh/rh. size - 55.635 x 6.35 mm - d/th read. go & nogo gauge. wear limit - 1 mm ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material - st ainless steel & hardened. supply with calibration certificate - valid for min. 01 year issued from nabl approv ed lab [ warranty period: 30 months after the date of delivery ] ]