corrigendum : supply of shell kit (memu ndmc jk) , shell kit for memu ndmc jk 962 a. roof assembly 96216001 000 01 alt a - 1no locati on of sidewall 96214001 000 01 alt nil - 1 no end construction pail end 94515001 000 01 alt a - 1 no end construction shunting desk side 96215001 000 01 alt nil - 1 no firm shall fulfill the ma nufacturing facility as per icf/md/specn-200, issue status 01, rev 04 with amendment no 01. firm shall fulfill the manufacturing facility as per icf/md/specn-315,issue status 01, rev.00 with amendment no 01. b.supply of one coach set of body shell items and partitio n frames for memu ndmc jk 962 to drawing nos 1. 96210002 000 01 alt b - 1 no 2. 96210007 000 01 alt b - 1 no 3. 96210026 000 01 alt nil- 1 no 4. 96210046 000 01 alt nil- 1 no 5. 9621 0064 000 01 alt nil- 1 no 6. 94410054 000 01 alt nil- 2 nos 7. 94410076 000 01 alt nil- 1 no 8. 94410072 000 01 alt nil- 1 no c. under frame arrangement 96211001 000 01 alt d - 1 no firm shall fulfill the manufacturing facility as per icf/md/spec-147,issue status 01 rev.02 wit h amendment no.02. special condition : packing as per icf/j&t/misc-2201, alt f. packing as pe r icf/j&t/sk-1809, alt a. packing condition as per drg.no.icf/j&t/misc-2487, alt b the und er frame should be supplied as normal side up & side bearer side down. packing conditi on as per icf/j&t/sk-1865, alt a. (a) raw material stage #ensure the raw material used using porta ble spectrometer (b) jig stage #assembly of front part with sole bar. #assembly of modular frame arr angement. #weld parameters to be checked & recorded (c) trestle stage #marking, drilling & tappin g of holes wherever necessary. #marking & placing of detail items. #complete welding wherever nece ssary. #weld parameters to be checked & recorded #assembly & welding of trough sheets. #dimensi onal & visual checks. #punching of serial no & ensuring proper traceability. (d) surface preparation an d painting stage. #short/sand blast to the requirements. #painting process as per the specification. # visual inspection. #final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trou gh floor with cross members to avoid bi-metallic corrossion. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]