tender for miscellaneous work in subdivision iii sangod- 1 providing and erecting direction and place identifications of semi reflective sign boards as per irc:67 made of 2 mm thick m.s. sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape of required shade and colour. supported and welded on 47 mm x 47mm of 12 swg square tube of 3050 mm height duly strengthened by 25 mm x 5 mm m/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and specification upto 0.9 sqm size board. 2 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and morth specification clause 801.600 mm equilateral triangle 3 raised payment marker (cats eye): supplying and fixing of molded shank raised pavement markers made of abs moulded body and polycarbonate reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 35000 kilogram tested in accordance to asim d 4280 & astm d 788. the height of road stud is 20mm, width 100mm, length 100mm and minimum reflective area of 13 sqcm on each side.the strength of detachment of the integrated cylender shank not less than 14+/-2mm (thickness) and height not less than 30+ 2mm from the body. fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive 4 marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160\ c with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. please enable macros to view boq information