tender for truss work at ntphc hajinar, kupwara.- 1 structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.welded 2 providing and fixing of eaves boarding made from pre-coated galvanised steel sheets, 0.50 mm thick (±0.05%), zinc coating 120 g/sqm 240 mpa steel grade, with 5–7 micron epoxy primer on both sides, 300 mm width, complete including all fixtures and fasteners 3 providing and fixing soffit using 0.50 mm thick pre-painted colour coated galvanized iron (gi) profile/plain sheets , with minimum 120 gsm zinc coating and polyester paint coating, fixed to gi angle/channel framework with self-drilling/self-tapping screws complete with job 4 providing colour coated sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick 5 providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gram/m 6 providing valleys of 90cm wide overall in plain g.s. sheets fixed with polymer coated j. or l. hooks, bolts and nuts 8 mm dia g.i. limpet and bitumen washers complete. 7 providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position(budloo wood) 8 providing and fixing 12mm thick panelling new zealand eqivalent over frame work of 50x25 mm wooden beattens placed at 600c/c both ways incl neceesay screws ,nails adhesive complete job 9 providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) inc carriage